ZyXEL Communications 100WH user manual Default Dial-in Setup Fields, Field Description

Prestige 100WH Internet Access Router

Table 6-2 describes and contains information on how to configure each parameter in Menu 13 - Default Dial-in Setup.

Table 6-2.	Default Dial-in Setup Fields
Field		Description
Telco Options: CLID		This field sets the CLID (Calling Line ID) authentication parameter for all
Authen		incoming calls. There are three options for this field:
		• None - No CLID is required.
		• Required – CLID MUST be available, or the Prestige will not answer
		the call.
		• Preferred - If the CLID is available then CLID will be used for
		authentication. If the CLID is not available, authentication is done in
		PPP negotiation.
PPP Options: Recv.		This field sets the authentication protocol used for incoming calls. User
Authen		names and passwords are configured in the next section (Dial-in Users
		Setup). Options for this field are:
		• CHAP/PAP - Your Prestige will try CHAP first, but PAP will be used if
		CHAP is not available.
		• CHAP - Use CHAP only.
		• PAP - Use PAP only.
		• None - Your Prestige will try CHAP first, but no authentication is
		required if CHAP is not available.
PPP Options: Mutual		Some vendors (for example, Cisco) implement mutual authentication.
Authen		That is, the node that initiates the call will request a user name and
		password from the far end that they are dialing to. If the remote node that
		is dialing in implements this type of authentication, set this field to Yes.
PAP Login		This field will only be enabled if the Mutual Authen. Field is [Yes]. Enter in
		the PAP login name for this Prestige. This field does not apply to CHAP
		authentication.
PAP Password		This field will only be enabled if the Mutual Authen is [Yes]. Enter the PAP
		password for this Prestige. This field does not apply to CHAP
		authentication.

Chapter 6 Dial-in Server Applications 6-5