Prestige 100WH Internet Access Router
Chapter 9
Telnet Configuration and Capabilities
9.1About Telnet Configuration
When you first configure your Prestige, it must be done via the console port since your Prestige does not have the network parameters set yet. However, once your Prestige has been configured, you can telnet to the Prestige remotely to perform the configuration, as shown in Figure
Telnet from any
station on the Network
TCP/IP Network
Prestige with
Network IP Address
PSTN/ISDN Network
Modem / ISDN TA
Modem
ISDN TA
Telnet from any
Remote Location
Modem / ISDN TA
Modem
ISDN TA
Prestige 100WH
Ethernet LAN
Figure 9-1. Telnet Configuration on a TCP/IP Network
Chapter 9 Telnet Configuration and Capabilities |