ZyXEL Communications 100WH user manual Remote Node Setup, Applications

Prestige 100WH Internet Access Router

5.1.1Remote Node Setup

Follow the procedure in Chapter 5 - Remote node Configuration for LAN-to-LAN to fill the protocol-independent parameters in Menu 11 - Remote Node Profile. For the protocol- dependent parameters, follow the instructions below. If you are configuring your Prestige to receive an incoming call, you also need to set the default dial-in parameters in Menu 13.

To edit Menu 11.3 - Remote Node Network Layer Options shown in Figure 5-2, follow these instructions:

•In Menu 11.1 - Remote Node Profile, move the cursor to the [Edit IP] field, then press the space bar to toggle and set the value to [Yes], then press [Enter] to edit Menu 11.3 - Network Layer Options.

Figure 5-2. Menu 11.3- Remote Node Network Layer Options for TCP/IP

Menu 11.3 - Remote Node Network Layer Options

Rem IP Addr: 0.0.0.0

Rem Subnet Mask= 0.0.0.0

My WAN Addr= 0.0.0.0

Single User Account= No

Server IP Addr= N/A

Metric= 2

Private= No

RIP Direction= Both

Version= RIP-2B

Enter here to CONFIRM or ESC to CANCEL:

Applications

5-2Chapter 5 Remote Node TCP/IP Configuration