ZyXEL Communications user manual Prestige 100WH WAN Port Setup

Prestige 100WH Internet Access Router

2.9Prestige 100WH WAN Port Setup

This section describes how to configure the WAN port and the connected WAN device on your Prestige with Menu 2-WAN Port Setup. If advanced setup is required, go into Menu 2.1. When you are finished, press [Enter] in Menu 2.1 to save your configuration.

2.9.1WAN Port Setup

To configure the WAN Port on the Prestige, follow these steps:

Step 1. Select option [2. WAN Port Setup] in the Main Menu by typing 2 at the menu selection number prompt.

Step 2. This will bring up Menu 2 –WAN Port Setup, as shown in Figure 2-7.

Menu 2.1 – WAN Port Setup

Modem Name= ZyXEL

Active= Yes

Direction= Outgoing

Phone Number=

Port Speed=

AT Command String

Init= at&fs0=0w2s95=1

Advanced Setup= No

Press ENTER to Confirm or ESC to Cancel:

Figure 2-7. Menu 2.1 –WAN Port Setup

2-12Chapter 2 Hardware Installation & Initial Setup