ZyXEL Communications 100WH user manual Edit PPP Options, Editing Script Options for details

		Prestige 100WH Internet Access Router
Table 4-1.	Remote Node Profile Menu Fields for Dial-up Line Applications
(continued)
Field		Description
Edit PPP Options		To edit the PPP options for this remote node, move the cursor to this
		field, use the space bar to select [Yes] and press [Enter]￿ . This will
		bring you to Menu 11.2 - remote node PPP Options. For more
		information on configuring PPP options, see the section Editing PPP
		Options.
Rem IP Addr		This is a required field. Enter the IP address of the remote gateway.
Edit IP		To edit the parameters, select [Yes] and press [Enter]. This will bring
		you to Menu 11.3 - Remote node Network Layer Options. For more
		information on this screen, refer to the Chapter 5 pertaining to the
		TCP/IP protocol.
Edit Script Options		To edit the parameters, select [Yes] and press [Enter]. This will bring
		you to Menu 11.4 - Remote node Script Options. See Section 3.7
		Editing Script Options for details.
Telco Options:
Allocated Budget		This field sets a budget outgoing call time for the remote node. The
(min)		default for this field is [0] for no budget control.
Period (hr)		This field sets the time interval to reset the above outgoing call
		budget control.
Session Options:		In these fields, select which filter set(s) you would like to apply to
		the incoming and outgoing traffic between this remote node and
Input Filter Sets,		your Prestige. You can choose from 12 different filter sets. In
Output Filter Sets		addition, you can link up to 4 filter sets together for further
and Call Filter Sets		customization (for example, 1, 5, 9, 12). The default is Blank.
		Note that spaces are accepted in this field.
		For more information on customizing your filter sets, see Chapter 7.
		The default is blank, that is, no filters defined.

Chapter 4 Remote Node Configuration 4-5