KTI Networks KCD-400 Series manual Far End Fault Function

Page 12

Far End Fault Function

The fiber port is facilitated with this function. When the fiber port detects a link failure on its receiving circuitry, it will send out an FEFI (Far End Fault Indication) signal to the remote connected device to indicate a remote fault is detected.

It also is capable to receive FEFI signal sent from the remote link partner if the link partner detected a receiving fault. Upon receiving an FEFI signal, it indicates a link failure occurred on the transmitting path. This function allows the converter to report a fiber link fault even when a link failure occurred on transmitting fiber cable.

-12-

Image 12
Contents 1000BASE-T to 1000BASE-X Media ConvertersUnited States InternationalEthernet is a registered trademark of Xerox Corp Table of Contents Introduction Features Specifications LEDIndicators Twisted-Pair Interface Copper PortFiber Optic Interface Fiber Port DC Power Interface Basic InformationMechanical EnvironmentalCertificate CE/EMCLink Fault Pass Through Function Special FunctionsAutoMDI/MDI-XFunction Far End Fault Function Installation UnpackingSafety Cautions DIN-Rail Mounting Page Panel Mounting Screw locations and final dimension are shown below Applying Power Using Terminal BlocksPage Using DC Power Jack Power Failure Relay Output Making Twisted Pair Copper Port Connection Network CablesInstalling SFP Fiber Transceiver Connecting Fiber CablesMaking Fiber Port Connection LED Indicators Appendix Model Optical Specifications Model Specifications