KTI Networks KCD-400 Series manual United States, International

Page 2

(C)2005 KTI Networks Inc. All rights reserved. No part of this documen- tation may be reproduced in any form or by any means or used to make any directive work (such as translation or transformation) without per- mission from KTI Networks Inc.

KTI Networks Inc. reserves the right to revise this documentation and to make changes in content from time to time without obligation on the part of KTI Networks Inc. to provide notification of such revision or change.

For more information, contact:

United States

KTI Networks Inc.

 

P.O. BOX 631008

 

Houston, Texas 77263-1008

 

Phone:

713-2663891

 

Fax:

713-2663893

 

E-mail:

kti@ktinet.com

 

URL:

http://www.ktinet.com/

International

Fax:

886-2-26983873

 

E-mail:

kti@ktinet.com.tw

 

URL:

http://www.ktinet.com.tw/

Image 2
Contents 1000BASE-T to 1000BASE-X Media ConvertersUnited States InternationalEthernet is a registered trademark of Xerox Corp Table of Contents Introduction Features Specifications Fiber Optic Interface Fiber Port LEDIndicatorsTwisted-Pair Interface Copper Port Mechanical DC Power InterfaceBasic Information EnvironmentalCertificate CE/EMCAutoMDI/MDI-XFunction Link Fault Pass Through FunctionSpecial Functions Far End Fault Function Installation UnpackingSafety Cautions DIN-Rail Mounting Page Panel Mounting Screw locations and final dimension are shown below Applying Power Using Terminal BlocksPage Using DC Power Jack Power Failure Relay Output Making Twisted Pair Copper Port Connection Network CablesMaking Fiber Port Connection Installing SFP Fiber TransceiverConnecting Fiber Cables LED Indicators Appendix Model Optical Specifications Model Specifications