Features | KTI Networks KCD-400 Series instruction

1.1 Features

•Gigabit copper to fiber conversion: 1000Base-T-to-1000Base-SX/LX over multimode or single-mode fiber

•SFP design : For flexibility, an SFP (Mini-GBIC) connector is provided for the fiber port to accommodate any type of SFP fiber transceiver when needed.

•Support full wire speed copper to fiber conversion

•Auto MDI/MDI-X detection function on the copper port

•Auto-negotiation support

•Plug and play : no configuration settings is required

•Link Fault Pass Through : this function allows link fault status passes through between copper link and fiber link transparently.

•Far End Fault function on fiber port

•Transparent conversion to any type of packet frame

•No packet length limitation

•Diversified mounting support : desktop mounting, wall mounting, optional Din-Rail support

•Low power consumption

•Two power interface type: screw terminal block and DC jack

•Wide operating voltage input range : +7 ~ 30VDC

•Support DIN rail mounting

•Support panel mounting

•High and wide operating temperature range : -20oC to 70oC

•Industrial-rated Emission and Immunity performance

-6-