KTI Networks KCD-400 Series manual Using DC Power Jack

Page 21

Using DC Power Jack

DC Jack Connector: JackD6.3mmD2.0mm

AC Power Adapters: Optional commercial rated adapters are available for purchasing.

Rated AC120V/60Hz DC7.5V 1A

Rated AC230V/50Hz DC7.5V 1A

Rated AC100V/50-60Hz DC7.5V 1A

Rated AC240V/50Hz DC7.5V 1A

Connect power adapter DC plug to the DC power jack of the converter before connecting to the AC outlet. Connect the power adapter to the AC outlet.

Note: Before you begin the installation, check the AC voltage of your area. The AC power adapter which is used to supply the DC power for the unit should have the AC voltage matching the commercial power voltage in your area.

-21-

Image 21

Contents Media Converters 1000BASE-T to 1000BASE-XInternational United StatesEthernet is a registered trademark of Xerox Corp Table of Contents Introduction Features Specifications LEDIndicators Twisted-Pair Interface Copper PortFiber Optic Interface Fiber Port Basic Information DC Power InterfaceMechanical EnvironmentalCE/EMC CertificateLink Fault Pass Through Function Special FunctionsAutoMDI/MDI-XFunction Far End Fault Function Unpacking InstallationSafety Cautions DIN-Rail Mounting Page Panel Mounting Screw locations and final dimension are shown below Using Terminal Blocks Applying PowerPage Using DC Power Jack Power Failure Relay Output Network Cables Making Twisted Pair Copper Port ConnectionInstalling SFP Fiber Transceiver Connecting Fiber CablesMaking Fiber Port Connection LED Indicators Model Specifications Appendix Model Optical Specifications