KTI Networks KCD-400 Series manual Installation, Unpacking

Page 13

2. Installation

2.1 Unpacking

Check that the following components have been included:

•Information CD

•The Media Converter unit

•DIN-rail mounting bracket

If any item is found missing or damaged, please contact your local reseller for replacement.

The following are available optional accessories:

•Panel Mounting Bracket

The bracket is used for mounting the converter on a panel surface.

•Commercial-rated AC power adapters:

-Rated AC120V/60Hz DC7.5V 1A

-Rated AC230V/50Hz DC7.5V 1A

-Rated AC100V/50-60Hz DC7.5V 1A

-Rated AC240V/50Hz DC7.5V 1A

The adapters are used for supplying DC power to the converter via DC power jack interface.

-13-

Image 13

Contents Media Converters 1000BASE-T to 1000BASE-XInternational United StatesEthernet is a registered trademark of Xerox Corp Table of Contents Introduction Features Specifications Twisted-Pair Interface Copper Port LEDIndicatorsFiber Optic Interface Fiber Port Basic Information DC Power InterfaceMechanical EnvironmentalCE/EMC CertificateSpecial Functions Link Fault Pass Through FunctionAutoMDI/MDI-XFunction Far End Fault Function Unpacking InstallationSafety Cautions DIN-Rail Mounting Page Panel Mounting Screw locations and final dimension are shown below Using Terminal Blocks Applying PowerPage Using DC Power Jack Power Failure Relay Output Network Cables Making Twisted Pair Copper Port ConnectionConnecting Fiber Cables Installing SFP Fiber TransceiverMaking Fiber Port Connection LED Indicators Model Specifications Appendix Model Optical Specifications