Canon 7585 manual Computer Input, Computer System Selection, Automatic Multi-Scan System

Computer Input

Computer System Selection

Automatic Multi-Scan System

This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, SXGA+, WXGA, or UXGA (refer to “Compatible Computer Specifications” on pages 71–72). If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Some computers need to be set manually.)

One of the following messages may appear when:

Auto	The projector cannot recognize the connected signal
	conforming to the provided PC Systems. The “Auto” is
	displayed on the System Menu box and the Auto PC
	Adjustment function works to display proper images.
	If the image is not projected properly, a manual
	adjustment is required. (pp. 36–37.)

-----There is no signal input from the computer. Check the connection between your computer and the projector. (See “Troubleshooting” on page 64.)

Mode 1	The preset system is manually adjustted in the PC
	Adjust Menu. The adjusted data can be stored in the
	Mode 1–10. (pp. 36-37)
	PC systems provided in this projector is chosen. The
SVGA 1
	projector chooses a proper system provided in the
	projector and displays it.

=Mode 1 and SVGA 1 are examples.

PC SYSTEM MENU

PC System Menu icon

Selected system is displayed.

PC SYSTEM MENU

Selecting Computer System Manually

PC system can also be selected manually.

1Press the MENU button to display the On-Screen Menu. Use the Point  buttons to move the red frame pointer to the PC System Menu icon.

2Use the Point ! buttons to move the red arrow pointer to the desired system, and then press OK button.

PC System Menu icon Selected system is displayed

Systems in this dialog box can be selected.

Custom Mode (1–10) set in PC Adjust Menu. (pp.36–37)

34