Canon 7585 manual Picture Image, Image Adjustment, List, Image Adjust Menu, Pointer Mode

Page 45

Picture Image

Image Adjustment

1Press the MENU button to display the On-Screen Menu. Use the Point buttons to move the red frame pointer to the Image Adjust Menu icon.

2Use the Point ! buttons to move the red frame pointer to the desired item and then press the OK button to display the

adjustment dialog box. Use the Point buttons to adjust the setting value.

Contrast

Press the Point button to decrease contrast; press the Point button to increase the contrast (from 0 to 63).

Brightness

Press the Point button to decrease the brightness; press the Point button to increase the brightness (from 0 to 63).

Color =

Press the Point button to decrease the intensity of the color; press the Point button to increase the intensity of the color (from 0 to 63).

Tint =

Press the Point buttons to adjust the tint value to obtain proper color balance (from 0 to 63).

Color Management

The Color Management function can be used to adjust the LEVEL, PHASE, and GAMMA of the selected display colors (except for black, white, and gray) on the screen and replace these colors with other colors if required.

You can store up to eight (8) color management data.

1Use the Point ! buttons to move the red frame pointer to Color Management, and then press the OK button. The projected image freezes, and the COLOR MANAGEMENT POINTER appears.

2Use the Point ! buttons to move the pointer to the spot where you want to adjust the color and then press the OK button. The COLOR SELECTION window appears, and the color in the center of the pointer is selected and you can adjust the color.

3Use the Point ! buttons to adjust the LEVEL and PHASE of the color, and then press the OK button to confirm

the setting. Then use the Point ! buttons to adjust the GAMMA for the color and press the OK button to accept the setting. After adjusting, press the OK button to go to the

COLOR MANAGEMENT LIST.

COLOR SELECTION MODE

LIST

Go to the COLOR MANAGEMENT LIST.

IMAGE ADJUST MENU

Image Adjust Menu icon

Move the red frame pointer to the desired item and then press OK button.

Use the Point buttons to adjust the setting value.

POINTER MODE

COLOR MANAGEMENT

POINTER

Note:

•= Displayed only in Video Input.

•Tint cannot be selected when the video system is PAL, SECAM, PAL-M, or PAL-N (p.41).

45

Image 45

Contents 8VHU·V0DQXDO Features and Design Table of Contents Risk of Electric Shock Do not Open To The OwnerSafety Instructions Top Panel Air CirculationPositioning Precautions Installing the Projector in Proper DirectionsTransporting the Projector Moving the ProjectorCompliance AC Power Cord for the United States and CanadaFederal Communications Commission Notice Canadian Radio Interference RegulationsFront Back Part Names and FunctionsBottom Top Cover Release Button Lens CapReset button USB Connector Series BRear Terminal INFRARED Remote Receiver BackIndicators on the top panel Side Control and IndicatorsRemote Control Unit FOCUS buttons Adjust the focus p.28 BLANK button P-TIMER buttonMENU button D-ZOOM buttonRemote Control Battery Installation Remote Control Receivers and Operating RangeWired Remote Control Transmitter Remote Control Code Installation Adjustable FeetPositioning the Projector Removing the lens Lens InstallationAttaching the lens to the projector DVI-Digital Cable = USB Cable BNC Cable = Connecting to a Computer Digital and Analog RGBMonitor Out Signal Table Connecting to Video Equipment Video, S-VideoConnecting the AC Power Cord For the U.KFor the U.S.A. and Canada For Continental Europe Basic Operation What is PIN code?Turning On the Projector Enter a PIN codeTurning Off the Projector Remote Control Unit How to Operate the On-Screen MenuSide Control On-Screen MenuMenu Bar Focus Adjustment Zoom AdjustmentLens Shift Adjustment Operating with Projector ControlOperating with Remote Control Unit Filter button Timer buttonBlank button Mouse Pointer buttonWireless Mouse Operation Pointer FunctionPointer Remote Control button operation Remote Control OperationInput Selection InputMenu Operation Computer Input Source SelectionInput Menu Source Select MenuVideo Input Source Selection When Selecting Input 3 AV TerminalsComputer System Selection Computer InputAutomatic Multi-Scan System Selecting Computer System ManuallyPC Adjust Menu Auto PC AdjustmentDirect Operation Auto PC adjManual PC Adjustment Mode free To clear the adjusted data ResetTo store the adjusted data StoreStandard Image Level SelectionHigh contrast CustomScreen Menu Screen Size AdjustmentCeiling KeystoneRear Digital zoom +Video System Selection Video InputVideo Jack or S-Video Jack Pb/Cb, Pr/Cr JacksCinema Provide the image at the normal video aspect ratio Keystone Image Adjust Menu Image AdjustmentPointer Mode Picture ImageMenu Color MList Color M Menu Color PaletteOffset Red/Green/Blue White balance Red/Green/BlueSharpness GammaSetting SettingLogo Logo selectLogo Capture Change the Logo PIN code lock setting Enter a Logo PIN codeChange the Logo PIN code RC sensor USB Security Key lock PIN code lockSecurity Change the PIN Code Change the PIN Code Lock settingFactory default Filter counterTest pattern Filter Instructions Maintenance and CareReplacing the Filter Cartridge Reset the filter counter and the scroll counter p.58Resetting the Scroll Counter Resetting the Filter CounterFilter counter Scroll counterLamp Replace indicator Lamp ReplacementReset the Lamp counter p.60 Top PanelOrder Replacement Lamp Resetting the Lamp CounterLamp Handling Precautions Cleaning the Projector Cabinet Cleaning the Projection LensThen check the matters below Lamp indicator lights on and other four indicators blinkAppendix TroubleshootingWireless mouse Remote control unitDoes not work Function does notMenu Tree Image AdjustComputer Input/Video Input InformationSystem PC AdjustImage Select ScreenUSB SettingIndicators and Projector Condition Projector is operating normallyProjector is detecting abnormal condition Appendix Indicators Resolution Compatible Computer Specifications59.940 Signal Compatibility Panel ResolutionPower AccessoriesTo the sales and service engineers Lens ReplacementOptional Parts PJ Link NoticeUSB Connector Series B Configurations of TerminalsControl Port Connector D-sub 9 pin ANALOG/ Monitor OUT Mini D-sub 15 pinWhile the projector is locked with the PIN code Dimensions Serial Control Interface OperationExample Format Functional Execution CommandCR0 Status Read CommandCanon Italia S.p.A Canon Deutschland GmbHCanon Schweiz A.G Canon GmbH