Computer Input
Keystone
This function is used to store or reset the keystone correction when the AC power cord is unplugged. Use the Point buttons to switch between each option.
Store. . . Keep the keystone correction even when the AC power cord is unplugged.
Reset . . Release the keystone correction when the AC power cord is unplugged.
To correct keystone distortion, press the OK button. The Keystone dialog box appears. Use the Point ! buttons to correct keystone distortion. (p.29)
Ceiling
When this function is set to “On,” the picture is top/bottom and left/right reversed. This function is used to project the image from a
Rear
When this function is set to “On,” the picture is left/right reversed. This function is used to project the image from the rear of the screen.
Reset
This function returns all adjusted values to the factory default settings. Press the OK button at Reset to display a confirmation box. To reset, press the OK button at “Yes.”
Quit
Exit the Screen Size Adjustment Menu.
For zooming in and out the images
Digital zoom +
Select Digital zoom +. The
You can also enter the Digital zoom + mode by pressing the
Digital zoom –
Select Digital zoom
“D- zoom
You can also enter the Digital zoom – mode by pressing the
To exit the Digital Zoom +/– mode, press any button except the
SCREEN MENU
Move the red frame pointer to the desired function and press the OK button.
Ceiling |
Rear |
Note:
•The panning function may not operate properly if the stored Mode in the PC Adjust Menu is used. (p. 37)
•The minimum compression ratio can be limited depending on the input signal or when the Keystone function is working.
•Digital zoom +/– cannot be selected when Full screen orTrue is selected.
40