Canon 7585 manual Auto PC Adjustment, Direct Operation, Auto PC adj, PC Adjust Menu

Page 35

Computer Input

Auto PC Adjustment

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical positions to conform to your computer.

Direct Operation

Remote Control Unit

The Auto PC adjustment function can be operated directly by pressing the AUTO PC button on the remote control unit.

AUTO PC button

Menu Operation

Auto PC adj.

1Press the MENU button to display the On-Screen Menu. Use the Point buttons to move the red frame pointer to the PC Adjust Menu icon.

2Use the Point ! buttons to move the red frame pointer to the AUTO PC adj. icon and then press the OK button twice.

To store the adjusted parameters.

The adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting Mode in PC SYSTEM Menu (p.34). See MANUAL PC ADJUSTMENT on pages 36–37.

Note:

•Fine sync, Total dots, Horizontal and Vertical position of certain computers cannot be fully adjusted with the Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required. (pp. 36–37.)

•Auto PC Adjustment cannot be operated in Digital Signal Input on the DVI terminal and “480p,” “575p,” “480i,” “575i,” “720p,” “1035i,” or “1080i” is selected on the PC SYSTEM Menu.

•Depending on the condition of signals and the type and length of cables, the signals may not be properly viewed.

PC ADJUST MENU

PC Adjust Menu icon

Move the red frame pointer to the Auto PC adj. and press the OK button twice.

“Please wait...” appears while the Auto PC adjustment is in process.

35

Image 35

Contents 8VHU·V0DQXDO Features and Design Table of Contents Risk of Electric Shock Do not Open To The OwnerSafety Instructions Top Panel Air CirculationPositioning Precautions Installing the Projector in Proper DirectionsTransporting the Projector Moving the ProjectorCanadian Radio Interference Regulations AC Power Cord for the United States and CanadaCompliance Federal Communications Commission NoticeTop Cover Release Button Lens Cap Part Names and FunctionsFront Back Bottom INFRARED Remote Receiver Back USB Connector Series BReset button Rear TerminalIndicators on the top panel Side Control and IndicatorsRemote Control Unit D-ZOOM button P-TIMER buttonFOCUS buttons Adjust the focus p.28 BLANK button MENU buttonWired Remote Control Transmitter Remote Control Battery InstallationRemote Control Receivers and Operating Range Remote Control Code Positioning the Projector InstallationAdjustable Feet Removing the lens Lens InstallationAttaching the lens to the projector DVI-Digital Cable = USB Cable BNC Cable = Connecting to a Computer Digital and Analog RGBMonitor Out Signal Table Connecting to Video Equipment Video, S-VideoFor the U.S.A. and Canada For Continental Europe Connecting the AC Power CordFor the U.K Enter a PIN code What is PIN code?Basic Operation Turning On the ProjectorTurning Off the Projector On-Screen Menu How to Operate the On-Screen MenuRemote Control Unit Side ControlMenu Bar Operating with Projector Control Zoom AdjustmentFocus Adjustment Lens Shift AdjustmentOperating with Remote Control Unit Mouse Pointer button Timer buttonFilter button Blank buttonPointer Wireless Mouse OperationPointer Function Input Remote Control OperationRemote Control button operation Input SelectionSource Select Menu Computer Input Source SelectionMenu Operation Input MenuVideo Input Source Selection When Selecting Input 3 AV TerminalsSelecting Computer System Manually Computer InputComputer System Selection Automatic Multi-Scan SystemAuto PC adj Auto PC AdjustmentPC Adjust Menu Direct OperationManual PC Adjustment Store ResetMode free To clear the adjusted data To store the adjusted dataCustom Image Level SelectionStandard High contrastScreen Menu Screen Size AdjustmentDigital zoom + KeystoneCeiling RearPb/Cb, Pr/Cr Jacks Video InputVideo System Selection Video Jack or S-Video JackCinema Provide the image at the normal video aspect ratio Keystone Picture Image Image AdjustmentImage Adjust Menu Pointer ModeColor Palette Color MMenu List Color M MenuGamma White balance Red/Green/BlueOffset Red/Green/Blue SharpnessSetting SettingLogo Capture LogoLogo select Change the Logo PIN code Change the Logo PIN code lock settingEnter a Logo PIN code RC sensor USB Security Security Key lockPIN code lock Change the PIN Code Change the PIN Code Lock settingTest pattern Factory defaultFilter counter Filter Instructions Maintenance and CareReplacing the Filter Cartridge Reset the filter counter and the scroll counter p.58Scroll counter Resetting the Filter CounterResetting the Scroll Counter Filter counterTop Panel Lamp ReplacementLamp Replace indicator Reset the Lamp counter p.60Order Replacement Lamp Resetting the Lamp CounterLamp Handling Precautions Cleaning the Projector Cabinet Cleaning the Projection LensThen check the matters below Lamp indicator lights on and other four indicators blinkAppendix TroubleshootingFunction does not Remote control unitWireless mouse Does not workInformation Image AdjustMenu Tree Computer Input/Video InputScreen PC AdjustSystem Image SelectUSB SettingProjector is detecting abnormal condition Indicators and Projector ConditionProjector is operating normally Appendix Indicators Resolution Compatible Computer Specifications59.940 Accessories Panel ResolutionSignal Compatibility PowerPJ Link Notice Lens ReplacementTo the sales and service engineers Optional PartsANALOG/ Monitor OUT Mini D-sub 15 pin Configurations of TerminalsUSB Connector Series B Control Port Connector D-sub 9 pinWhile the projector is locked with the PIN code Dimensions Example Serial Control InterfaceOperation Format Functional Execution CommandCR0 Status Read CommandCanon GmbH Canon Deutschland GmbHCanon Italia S.p.A Canon Schweiz A.G