Crestron electronic manual Physical Description, CEN-CN Ports

Ethernet/Cresnet Interface Crestron CEN-CN

Physical Description

The CEN-CN, shown below, is housed in a black enclosure with silk-screened labels on the front and rear panels. On the front panel are six light-emitting diodes (LEDs) for indicating the status of the unit, the attached device(s), and the connected Ethernet. All connections are made through on the rear panel ports, a Crestron

6-conductor modular cable and two 4-pin connector plugs are provided. There are four rubber feet on the base of the unit for stability and to prevent slippage.

CEN-CN Physical Views

7.07 in

(17.95 cm)

12VDC	P C	NET	ETHERNET
		NET	NET
.5A
		24 Y Z G	24 Y Z G
CRESTRON ELECTRONICS INC. ROCKLEIGH, N.J. 07647 USA

6.32 in

(16.06 cm)

ETHERNET/CRESNET INTERFACE

ETHERNET

PWR NET RXD TXD LNK ERR

CRESTRON

CEN-CN

1.70in

(4.32 cm)

CEN-CN Ports

Each CEN-CN rear panel port has a silk-screened label. For the descriptions of the ports, refer to the diagram below and following paragraphs.

CEN-CN Rear Panel

1 2 V D C

.5A

P C	N E T					E THERN ET
			N E T		N E T
		2 4 Y Z G		2 4 Y Z G

CRESTRON ELECTRONICS INC. ROCKLEIGH, N.J. 07647 USA

2 ∙ Ethernet/Cresnet Interface: CEN-CN Operations Guide - DOC. 5721