Crestron electronic CEN-CN manual Troubleshooting Communications via Ethernet

Page 23

Crestron CEN-CN

Ethernet/Cresnet Interface

2.Enter the IP address of the configured CEN-CN and click the Connect button. (Within the address, X and Y may range from 0 to 255. In the example shown below, X is 1 and Y is 2.)

Connect TCP/IP Address

3.The message shown below signifies a successful connection.

Crestron Terminal Protocol Console Opened

4.Perform any of the diagnostics and features that the viewport provides.

Troubleshooting Communications via Ethernet

NOTE: Before performing this procedure, refer to “Hookup Diagram for Normal

Operation” on page 17 for cabling instructions.

You can PING the CEN-CN from a MS-DOS® prompt (Windows 95/98™) or a Command Prompt (Windows NT™). When the CEN-CN is at address 192.168.1.2 (Within the address, X and Y may range from 0 to 255. In the example shown below, X is 1 and Y is 2.), the unit should reply and there should be no packet loss, as shown.

NOTE: Verify that the IP Settings of the CEN-CN are correct, and that the PC can ping other devices that are on the CEN-CN's subnet.

MS-DOS or Command Screen

Operations Guide - DOC. 5721

Ethernet/Cresnet Interface: CEN-CN ∙ 19

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Page Crestron Contents Page Functional Description DescriptionCEN-CN Ports Physical DescriptionNET 12VDC .5 aPWR Leading SpecificationsCEN-CN Indicators EthernetSpecification Details Cresnet Network WiringInstalling Crestron Development Tools Configuration SetupObtaining Communications Configuration Cable Fabrication SpecificationsHookup Diagram for Configuration Communication via PC Port of CEN-CN Typical Connections When Configuring the CEN-CNVerifying Auto Baud Search Ethernet/Cresnet Interface Troubleshooting CommunicationsUpdating the CEN-CN 12 ∙ Ethernet/Cresnet Interface CEN-CN Operations Guide DOC Initial IP Setup Ethernet Configuration14 ∙ Ethernet/Cresnet Interface CEN-CN Operations Guide DOC Settings for Network with Changing the IP Table via Crestron Viewport IP Table SetupCrestron e-control IP Table Information Hookup Diagram for Normal OperationCommunicating via Ethernet CommunicationsTroubleshooting Communications via Ethernet Simpl Windows Example Program Problem SolvingTroubleshooting Further Inquiries Future UpdatesCrestron Limited Warranty Return and Warranty PoliciesMerchandise Returns / Repair Service CTP CIPNMS Trap Catcher IP IDIP MTU Master ListTCP/IP This page intentionally left blank Crestron CEN-CN Crestron Electronics, Inc Operations Guide DOC
Top Page Image Contents