Delta Electronics 700VA, 3KVA manual EC conformity declaration

Page 5

-A battery can present a risk of electric shock and high short circuit current. The following precaution should be observed when working on batteries.

Remove watches, rings or other metal objects.

Use tools with insulated handles.

-Eine Batterie kann eine Gefahr eines elektrischen Schlages und sehr groβer Kurzschluβ ströme beinhalten. Folgende Vorkehrungen sollten getroffen werden, wenn Sie mit der Batterie arbeiten.

Entfernen Sie Uhren, Ringe und andere metallische Objekte.

Verwenden Sie Werkzeug mit isollierten Griffen.

-The equipment is to be operated by fully trained personnels.

-Diese Gerät ist nur durch unterwiesenes Personal zu bedienen.

-EC conformity declaration

-These devices comply with the regulations of the following guide-lines:

-73/23/EEC guide-line of the Council for approximation of the legal regulations of the EC countries concerning the electrical apparatus within certain voltage tolerances, modified by the guide-line RL 93/68/EEC of the Council.

-89/336/EEC guide-line of the Council for approximation of the legal regulations of the EC countries concerning the electromagnetic compatibility, modified by the

guide-lines RL 91/236/EEC,......... and 93/68/EEC of the Council.

-The compliance with the following standards proves the conformity:

-EN 50091-1-1

-EN 55022/EN 55011, class B.

4

SHEET 5 TO 6

Image 5
Contents Sheet 1 to UL safety instructions Important Safety InstructionsOther safety notes Other safety instructions TUV safety instructionsFor installation EC conformity declaration Theory of operation IntroductionHigh power density FeaturePFC Power Factor Correction Complete ProtectionIntelligent design Safety approvalsConsiderate design Green function designRead before Operation Annotation and symbolOperation Panel Sheet 11 to Rear Panel Sheet 13 to Before Installation InstallationInstallation UnpackingUPS  If input type is terminal typeConnecting the battery bank Charging the batteryConnecting the RS-232/Dry contact Sheet 18 to Operation Cold start when utility is not presentTurning on the UPS Turning OFF the UPSSilence function UPS self-testSheet 21 to Derating power UPS internal faultStoring the message into Eeprom Programmable output OptionalMaintenance Placement Problem Possible Cause Solution TroubleshootingFault Message RS-232 Communication InterfaceDry Contact Sheet 29 to Technical specifications Sheet 31 to END