37
DCNT solution allows for dual active server operation, it is recommended that both servers be capable of handling the combined workloads of the two servers, as would occur during a failover operation. This should be taken into account when determining which servers are clustered together. For example, a DIGITAL Server 1200 handling file/print services should not be paired with a DIGITAL Server 7100 database server, handling
Each server must have at least one internal hard disk. This disk is required for the installation of the operating system, cluster, and application software. However, this disk is not part of the shared storage, so it cannot be failed over.
Neither DCNT nor MSCS support mixed architecture (Intel and Alpha) in the same cluster.
For a list of supported hardware for DCNT, see the Supported DCNT Hardware section.
For a list of supported hardware for MSCS, go to:
http://www.microsoft.com/hwtest
For the latest information on the status of our Microsoft Cluster Server qualification and certification efforts, go to:
http://akin40.mro.dec.com/clusters/DSClusterKits.htm
∙Disk Drives
Drives must be ordered separately.
Note: The drives for the DIGITAL Servers and the DIGITAL Server Cluster Kits are different. The drives differ in capacity, geometry and firmware levels, and are not interchangeable. These drives are not supported in the system or in the BA356
For DIGITAL Server Cluster Kits, supported drives include:
Part Number | Capacity | Notes |
|
|
|
FR- or | 2.1GB at 7200 rpm | Will be available through December 1998, no |
| Ultra Wide SCSI drive SBB | replacement |
|
|
|
FR- or | 4.29GB at 7200 rpm | Will be available through September 1998, |
| Ultra Wide SCSI drive SBB | replaced by |
|
|
|
FR- or | 4GB at 10000 rpm |
|
| Ultra Wide SCSI drive SBB |
|
|
|
|
9.1GB at 7200 rpm | ||
or | Ultra Wide SCSI drive SBB |
|
|
|
|
18.2 GB at 7200 rpm | Supported on the RA450, RA7000, and | |
| Fast Narrow | RA3000 |
|
|
|
18.2 GB at 7200 rpm | Supported on the RA450, RA7000, and | |
| Ultra SCSI | RA3000 |
|
|
|
∙LAN Network Connection
For the cluster to provide services to its clients, both servers and clients must be on a LAN. These guidelines assume that the components required for this are already in place, for example Network
-
DIGITAL Server Cluster Kits for Windows NT Configuration Guide