BOXLIGHT MP-57i, MP-58i user manual Auto Menu, Adjust, Power OFF, Power on

Page 30

Multifunctional Settings (continued)

AUTO Menu

With the AUTO menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below.

MENU

MAIN	ADJUST
PICTURE-1	POWER OFF	0 min
PICTURE-2	POWER ON	TURN ON
INPUT	SEARCH	TURN ON
AUTO	RESET
SCREEN
OPTION
NETWORK
: SELECT

Item	Description
Pressing the	(or the ENTER) button performs the automatic adjustment.

■At a RGB signal

The vertical position (V POSITION), the horizontal position (H POSITION), the clock phase (H PHASE) and the horizontal size (H SIZE) will be automatically adjusted.

memo Make sure that the application window is set to its maximum size prior to attempting to use this feature. Dark pictures may still be incorrectly adjusted. Use a bright screen when adjusting.

■At a video signal

	ADJUST	The signal type mode best suited for the respective input signal will be
		selected automatically.
		memo This function is available only when the AUTO is selected to the item
		“VIDEO” of the INPUT menu. For a component video signal, the signal type is
		identified automatically independently of this function.
		memo This operation requires approximately 10 seconds, and the message
		“AUTO IN PROGRESS” is displayed during the operation.
		memo This operation may not work well at some signals. If the picture
		becomes unstable (ex. a irregular picture, a color lack), please select the
		suitable mode to the item “VIDEO” of the INPUT menu.

		Set the time using the	/	buttons. :
		Long (max. 99 minutes)		Short (min. 0 minute = DISABLE)
			AUTO		AUTO
			POWER OFF		POWER OFF
			ENABLE		DISABLE
	POWER OFF	ex.	1min		0min
		ex.
		When the time is set to 1 to 99, the projector lamp will go off and the
		STANDBY/ON indicator begins blinking when the passed time with a proper
		signal (without no-signal and an unsuitable signal) reaches at the set time.
		Please refer to the section “Turning Off The Power”.

		Select the TURN ON or the TURN OFF using the			/	buttons.:
	POWER ON	TURN ON TURN OFF
	POWER ON	When the TURN ON is selected, you can turn the projector on without pressing

		the STANDBY/ON button. Please refer to the section “Turning Off The Power”.

				(This table is continued to the following page.)

29

Image 30

Contents MP-57i / MP-58i Trademark Acknowledgment Projector Features PreparationContents Projector Front/Right Part NamesProjector Audio in 1 port E Audio in 2 portRemote Control Remote ControlControl Buttons Setting Up ArrangementAdjusting The Projectors Elevator Using The Lens Shift ButtonsConnecting Your Devices ComputerProjector If using a M1-D input to mouse controlIf using a BNC input NetworkIf using a Scart RGB input If using a s-video signalIf using a component signal VCR/DVD Player ProjectorMonitorProjector Connecting The Power SupplySafety Guide and the following SpeakerProjectorAbout The Laser Pointer Remote ControlPeople. The laser beam can cause vision problems Putting BatteriesOperating The Remote Control Using The Remote ID FeatureUsing The Mouse/Keyboard Control Function Power ON/OFF Turning On The PowerTurning Off The Power Selecting An Input Signal OperatingAt a RGB signal not M1-D At a video signal Using The Automatic Adjustment FeatureAt a M1-D signal At a RGB signalPosition Use the cursor buttons Adjusting The Picture PositionCorrecting The Keystone Distortion Dialog and complete this operationAdjusting The Volume Muting The SoundTemporarily Blanking The Screen Using The Magunify Feature Freezing The ScreenPress the Magnify Button Displaying The Child Window Selecting An Audio InputMultifunctional Settings Using The Menu FunctionsEx. Turning off the built-in speaker Main Menu PICTURE-1 Menu PICTURE-1 Menu LOAD1 LOAD2 LOAD3 LOAD4SAVE1 SAVE2 SAVE3 SAVE4 PICTURE-2 Menu PositionSize Component Input MenuColor Space 3D-YCSInput Menu Power on AdjustPower OFF Auto MenuSearch Auto MenuRGB BNC Video ComponentStart UP Screen MenuBlank Menu PositionHow to register your picture as the MyScreen Screen MenuMessage Option Menu Option Menu Dhcp SetupNetwork Menu OFFNetwork Setting Up Click Return to top Click Reboot to complete this operationEx. Case of IP Address = Lamp Replacing The Lamp Dealer to replace the lampKnob Air Filter Caring For The Air FilterCaring For The Inside Of The Projector Caring For The Cabinet And Remote ControlOther Care Caring For The LensTroubleshooting Related MessagesRelated Messages Regarding The Indicator Lamps Regarding The Indicator Lamps Such as by a power outage blackout, etc Phenomena That May Easily Be Mistaken For Machine DefectsPhenomena That May Easily Be Mistaken For Machine Defects Sound is mutedWarranty And After-Service Specifications