BOXLIGHT MP-57i, MP-58i user manual Caring For The Air Filter

Page 40

Air Filter

WARNING • Please carefully read the “User’s Manual - Safety Guide.

Before caring, make sure the power switch is off and the power cable is not plugged in, then wait at least 45 minutes for the lamp to cool sufficiently.

Use only the air filter of the specified type NJ08081.

Do not use the projector with the air filter and filter cover removed. The use without the air filter could result in damage.

CAUTION • If the air filter becomes clogged by dust or the like, internal temperature rises and could cause malfunction. The power is automatically turned

off in order to prevent the projector from overheating internally.

Caring For The Air Filter

The air filter should be cleaned about every 100 hours. If the indicators or a message prompts you to clean the air filter, clean the air filter as soon as possible.

If the soiling will not come off the air filter, or it becomes damaged, then it needs to be replaced. Please replace the air filter as soon as possible.

memo When you replace the lamp, please replace also the air filter.

1

Turn off the projector, and unplug the power cord. Allow the lamp bulb to cool for at

least 45 minutes.

 

After making sure that the projector has cooled adequately, remove the filter cover

2

and air filter.

3

Apply a vacuum cleaner to the top of the filter cover and

the air filter to clean.

If the soiling will not come off the air filter, or it becomes damaged, it needs to be replaced.

If the air filter needs to be replaced, contact your dealer to prepare a new air filter. Tell the dealer your air filter type.

Hold the release buttons of the filter cover while pulling down it.

4

Insert the cleaned air filter or a new air filter, and replace

the filter cover.

Turn on the projector power, and reset the filter timer.

5 (1) While the projector running, press the MENU button to open the menu.

(2)Choose the “OPTION” on the menu using the / button, then press the button or ENTER button.

(3)Choose the “FILTER TIME” using the / button, then press and hold the RESET button for 3 seconds.

(4)Choose the “RESET” using the button.

Hold the release button of the air filter while pulling out it.

memo Incorrectly resetting of the filter timer (resetting

without replacement, or neglect of resetting after replacement) will result in incorrect message functions.

39

Image 40
Contents MP-57i / MP-58i Trademark Acknowledgment Projector Features PreparationContents Part Names ProjectorProjector Front/Right Audio in 1 port E Audio in 2 portRemote Control Remote ControlControl Buttons Setting Up ArrangementAdjusting The Projectors Elevator Using The Lens Shift ButtonsConnecting Your Devices If using a M1-D input to mouse control If using a BNC inputComputerProjector NetworkIf using a s-video signal If using a component signalIf using a Scart RGB input VCR/DVD Player ProjectorConnecting The Power Supply Safety Guide and the followingMonitorProjector SpeakerProjectorRemote Control People. The laser beam can cause vision problemsAbout The Laser Pointer Putting BatteriesOperating The Remote Control Using The Remote ID FeatureUsing The Mouse/Keyboard Control Function Turning On The Power Power ON/OFFTurning Off The Power Selecting An Input Signal OperatingUsing The Automatic Adjustment Feature At a M1-D signalAt a RGB signal not M1-D At a video signal At a RGB signalAdjusting The Picture Position Correcting The Keystone DistortionPosition Use the cursor buttons Dialog and complete this operationMuting The Sound Adjusting The VolumeTemporarily Blanking The Screen Freezing The Screen Using The Magunify FeaturePress the Magnify Button Displaying The Child Window Selecting An Audio InputUsing The Menu Functions Multifunctional SettingsEx. Turning off the built-in speaker Main Menu PICTURE-1 Menu LOAD1 LOAD2 LOAD3 LOAD4 PICTURE-1 MenuSAVE1 SAVE2 SAVE3 SAVE4 Position PICTURE-2 MenuSize Input Menu Color SpaceComponent 3D-YCSInput Menu Adjust Power OFFPower on Auto MenuAuto Menu RGB BNCSearch Video ComponentScreen Menu BlankStart UP Menu PositionScreen Menu How to register your picture as the MyScreenMessage Option Menu Option Menu Setup Network MenuDhcp OFFClick Return to top Click Reboot to complete this operation Network Setting UpEx. Case of IP Address = Lamp Dealer to replace the lamp Replacing The LampKnob Air Filter Caring For The Air FilterCaring For The Cabinet And Remote Control Other CareCaring For The Inside Of The Projector Caring For The LensTroubleshooting Related MessagesRelated Messages Regarding The Indicator Lamps Regarding The Indicator Lamps Such as by a power outage blackout, etc Phenomena That May Easily Be Mistaken For Machine DefectsPhenomena That May Easily Be Mistaken For Machine Defects Sound is mutedWarranty And After-Service Specifications