BOXLIGHT MP-58i, MP-57i user manual Network Setting Up, Ex. Case of IP Address =

Page 37

Network Setting Up

This projector provides the NETWORK function. If you use this function, please consult your dealer for information.

To start, connect the NETWORK port to a gateway device via a RJ-45 (10BASE-1) cable, then set up the projector according to the Network environment in which you use it.

When you use a Network unsuitable to the DHCP function

Please set the IP Address, the Subnet Mask, the Gateway and the DHCP (on/off) using the NETWORK menu, referring to the section “NETWORK Menu”.

When you use a Network suitable to the DHCP function or has been set up

You can set the IP Address, the Subnet Mask, the Gateway and the DHCP (on/off) using a Web Browser of the computer connected to the Network. Although it needs a Web Browser of Internet Explorer 4.0 or higher.

Input the same IP address as set to the projector, to the Web Browser of the computer connected to LAN.

ex. Case of IP Address = 192.168.1.11

1)Input “http://192.168.1.11”.

2)Click “ENTER”.

3)Input the required data according to the screen.

4)Make sure of the input data, then click "Write".

memo These setting will be active after reboot. These setting will be stored, and used when DHCP is OFF.

5)Click “Return to top page”.

6)Click “REBOOT” to complete this operation.

36

Image 37

Contents MP-57i / MP-58i Trademark Acknowledgment Preparation Projector FeaturesContents Projector Part NamesProjector Front/Right Audio in 1 port E Audio in 2 portRemote Control Remote ControlControl Buttons Arrangement Setting UpUsing The Lens Shift Buttons Adjusting The Projectors ElevatorConnecting Your Devices If using a BNC input If using a M1-D input to mouse controlComputerProjector NetworkIf using a component signal If using a s-video signalIf using a Scart RGB input VCR/DVD Player ProjectorSafety Guide and the following Connecting The Power SupplyMonitorProjector SpeakerProjectorPeople. The laser beam can cause vision problems Remote ControlAbout The Laser Pointer Putting BatteriesUsing The Remote ID Feature Operating The Remote ControlUsing The Mouse/Keyboard Control Function Turning On The Power Power ON/OFFTurning Off The Power Operating Selecting An Input SignalAt a M1-D signal Using The Automatic Adjustment FeatureAt a RGB signal not M1-D At a video signal At a RGB signalCorrecting The Keystone Distortion Adjusting The Picture PositionPosition Use the cursor buttons Dialog and complete this operationMuting The Sound Adjusting The VolumeTemporarily Blanking The Screen Freezing The Screen Using The Magunify FeaturePress the Magnify Button Selecting An Audio Input Displaying The Child WindowUsing The Menu Functions Multifunctional SettingsEx. Turning off the built-in speaker Main Menu PICTURE-1 Menu LOAD1 LOAD2 LOAD3 LOAD4 PICTURE-1 MenuSAVE1 SAVE2 SAVE3 SAVE4 Position PICTURE-2 MenuSize Color Space Input MenuComponent 3D-YCSInput Menu Power OFF AdjustPower on Auto MenuRGB BNC Auto MenuSearch Video ComponentBlank Screen MenuStart UP Menu PositionScreen Menu How to register your picture as the MyScreenMessage Option Menu Option Menu Network Menu SetupDhcp OFFClick Return to top Click Reboot to complete this operation Network Setting UpEx. Case of IP Address = Lamp Dealer to replace the lamp Replacing The LampKnob Caring For The Air Filter Air FilterOther Care Caring For The Cabinet And Remote ControlCaring For The Inside Of The Projector Caring For The LensRelated Messages TroubleshootingRelated Messages Regarding The Indicator Lamps Regarding The Indicator Lamps Phenomena That May Easily Be Mistaken For Machine Defects Such as by a power outage blackout, etcSound is muted Phenomena That May Easily Be Mistaken For Machine DefectsSpecifications Warranty And After-Service