BOXLIGHT MP-57i, MP-58i user manual Regarding The Indicator Lamps

Page 44

Troubleshooting (continued)

Regarding The Indicator Lamps

Lighting and flashing of the STANDBY/ON indicator, the LAMP indicator, and the TEMP indicator have the meanings as described in the table below. Please respond in accordance with the instructions within the table. If the same indication is displayed after the treatment, or if an indication other than the following is displayed, please contact your dealer or service company.

NOTE • When the interior portion has become overheated, for safety purposes, the power source is automatically turned off, and the indicator lamps may also be turned off. In such a case, press the “” (OFF) side of the main power switch, and wait at least 45 minutes. After the projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp cover, and then turn the power on again.

STANDBY/ON

LAMP

TEMP

Description

indicator

indicator

indicator

 

Lighting

Turned

Turned

The projector is in a standby state.

in Orange

off

off

Please refer to the section “Power On/Off”.

 

 

 

 

Blinking

Turned

Turned

The projector is warming up.

in Green

off

off

Please wait.

 

 

 

 

Lighting

Turned

Turned

The projector is in an on state.

in Green

off

off

Ordinary operations may be performed.

 

 

 

 

Blinking

Turned

Turned

The projector is cooling down.

in Orange

off

off

Please wait.

 

 

 

 

 

 

 

The projector is cooling down. A certain error has

Blinking

(discre-

(discre-

been detected.

Please wait until the STANDBY/ON indicator finishes blink,

in Red

tionary)

tionary)

and then perform the proper response measure using the

 

 

 

 

 

 

item descriptions below as reference.

 

 

 

 

 

 

 

The lamp does not light, and there is a possibility

 

 

 

that interior portion has become heated.

 

 

 

Please turn the power off, and allow the unit to cool down at

 

 

 

least 20 minutes. After the projector has sufficiently cooled

Lighting

Lighting

Turned

down, please make confirmation of the following items, and

then turn the power on again.

in Red

in Red

off

• Is there blockage of the air passage aperture?

 

 

 

 

 

 

• Is the air filter dirty?

 

 

 

• Does the peripheral temperature exceed 35°C?

 

 

 

If the same indication is displayed after the treatment,

 

 

 

please change the lamp by referring to the section “Lamp”.

 

 

 

 

 

 

 

(This table is continued to the following page.)

43

Image 44
Contents MP-57i / MP-58i Trademark Acknowledgment Projector Features PreparationContents Part Names ProjectorProjector Front/Right Audio in 1 port E Audio in 2 portControl Buttons Remote ControlRemote Control Setting Up ArrangementAdjusting The Projectors Elevator Using The Lens Shift ButtonsConnecting Your Devices If using a M1-D input to mouse control If using a BNC inputComputerProjector NetworkIf using a s-video signal If using a component signalIf using a Scart RGB input VCR/DVD Player ProjectorConnecting The Power Supply Safety Guide and the followingMonitorProjector SpeakerProjectorRemote Control People. The laser beam can cause vision problemsAbout The Laser Pointer Putting BatteriesOperating The Remote Control Using The Remote ID FeatureUsing The Mouse/Keyboard Control Function Turning Off The Power Power ON/OFFTurning On The Power Selecting An Input Signal OperatingUsing The Automatic Adjustment Feature At a M1-D signalAt a RGB signal not M1-D At a video signal At a RGB signalAdjusting The Picture Position Correcting The Keystone DistortionPosition Use the cursor buttons Dialog and complete this operationTemporarily Blanking The Screen Adjusting The VolumeMuting The Sound Press the Magnify Button Using The Magunify FeatureFreezing The Screen Displaying The Child Window Selecting An Audio InputEx. Turning off the built-in speaker Multifunctional SettingsUsing The Menu Functions Main Menu PICTURE-1 Menu SAVE1 SAVE2 SAVE3 SAVE4 PICTURE-1 MenuLOAD1 LOAD2 LOAD3 LOAD4 Size PICTURE-2 MenuPosition Input Menu Color SpaceComponent 3D-YCSInput Menu Adjust Power OFFPower on Auto MenuAuto Menu RGB BNCSearch Video ComponentScreen Menu BlankStart UP Menu PositionMessage How to register your picture as the MyScreenScreen Menu Option Menu Option Menu Setup Network MenuDhcp OFFEx. Case of IP Address = Network Setting UpClick Return to top Click Reboot to complete this operation Lamp Knob Replacing The LampDealer to replace the lamp Air Filter Caring For The Air FilterCaring For The Cabinet And Remote Control Other CareCaring For The Inside Of The Projector Caring For The LensTroubleshooting Related MessagesRelated Messages Regarding The Indicator Lamps Regarding The Indicator Lamps Such as by a power outage blackout, etc Phenomena That May Easily Be Mistaken For Machine DefectsPhenomena That May Easily Be Mistaken For Machine Defects Sound is mutedWarranty And After-Service Specifications