Onkyo SKS-HT530 instruction manual Package Contents

Package Contents

Make sure your box contains all of the items below. If anything is missing, contact the nearest Onkyo dealer.

• Front speakers	• Speaker cable for front
(SKF-530F)	speakers 4.5 m (15 ft.)

	(Red)	(White)
• Center speaker	• Speaker cable for center
(SKC-530C)	speaker 3 m (10 ft.)

(Green)

• Surround speakers (SKM-530S/SKB-530)

• Speaker cables for surround speakers 9 m (30 ft.)

(Blue)	(Gray)	(Brown)	(Tan)
• Subwoofer (SKW-530)		• RCA cable for sub-
		woofer connection

The alphabet displayed at the end of the product name found in catalogs and on package represents the color of the system. Though the color varies, the specifications and operations are the same.

Getting to know Your Speaker Package

Subwoofer (SKW-530)

■Front

1

■Rear

MIN MAX

2 3 4

To AC outlet

ASTANDBY/ON indicator

Red: Subwoofer in standby mode

Green: Subwoofer on

With the Auto Standby function, the SKW-530 automatically turns on when an input signal is detected in Standby mode. When there’s no input signal for a while, the SKW-530 automatically enters Standby mode.

BOUTPUT LEVEL control

This control is used to adjust the volume of the sub- woofer.

CLINE INPUT

This RCA input should be connected to the sub- woofer pre out on your AV receiver, amp, or other receiver with supplied RCA cable.

DPOWER switch

Press this switch to the ON position to turn on the power. Press it to the OFF position to turn off the power.

Note:

The Auto Standby function turns the subwoofer on when the input signal exceeds a certain level. If the Auto Standby function does not work reliably, try slightly increasing or decreasing the subwoofer output level on your receiver or amp.

En-4