About Home Theater
Enjoying Home Theater
The Home Theater means that you can enjoy surround sound with a real sense of movement in your own
Front left and right speakers (SKF-530F)
These output the overall sound. Their role in a home theater is to provide a solid anchor for the sound image. They should be positioned facing the listener at about ear level, and equidistant from the TV. Angle them inward so as to create a triangle, with the listener at the apex.
Center speaker (SKC-530C)
This speaker enhances the front left and right speakers, making sound movements distinct and providing a full sound image. In movies it’s used mainly for dialog. Position it close to your TV facing forward at about ear level, or at the same height as the front left and right speakers.
Put it somewhere where it won’t slide around or fall.
Surround back left and right speak- ers (SKB-530)
These speakers further enhance the realism of surround sound and improve sound localization behind the listener. They are necessary to enjoy some listening modes (e.g. Dolby Dig- ital EX, and
Right
Subwoofer | Left |
|
The subwoofer handles the |
| |
|
| |
bass sounds of the LFE (Low- |
|
|
Frequency Effects) channel. |
|
|
The volume and quality of the |
|
|
bass output from your sub- |
| Surround left and right speakers |
woofer will depend on its posi- |
| |
| These speakers are used for precise sound positioning and to | |
tion, the shape of your listening |
| |
| add realistic ambience. Position them at the sides of the lis- | |
room, and your listening posi- |
| |
| tener, or slightly behind, about | |
tion. In general, a good bass |
| |
| ear level. Ideally they should be equidistant from the listener. | |
sound can be obtained by |
| |
|
| |
installing the subwoofer in a |
|
|
front corner, or at |
|
|
width of the wall, as shown. |
| |
| If the surround speakers are to be | |
|
| |
|
| that the walls are strong enough to support the speaker’s |
|
| weight. The weight that mounting screws can support varies |
|
| greatly depending on the wall material and the position of the |
|
| reinforcing ribs embedded in the wall. |
|
| Use long screws with a head diameter of 6.3 mm (1/4 inch) or |
| Corner | less and a shank diameter of 3.5 mm (1/8 inch) or less. (We |
|
| recommend that you consult a home installation profes- |
|
| sional.) |
1/3 room |
|
|
length |
|
|