Setting the presentation timer
The presentation timer can indicate the presentation time on the screen to help you achieve better time management when giving presentations. Follow these steps to utilize this function:
1. Press Timer Set up on the remote control or go to the SYSTEM SETUP: Basic > Presentation Timer menu and press MODE/ ENTER to display the Presentation Timer
page.
2.Highlight Timer Period and decide the timer
period by pressing 
/ 
. The length of time can be set from 1 to 5 minutes in 1- minute increments and 5 to 240 minutes in
3.Press 
to highlight Timer Display and choose if you want the timer to show up on the screen by pressing 
/ 
.
Selection | Description |
Always | Displays the timer on screen throughout the presentation time. |
|
|
3 min/2 min/1 min | Displays the timer on screen in the last 3/2/1 minute(s). |
|
|
Never | Hides the timer throughout the presentation time. |
|
|
4.Press 
to highlight Timer Position and set the timer position by pressing 
/ 
.
Top-Left 
Bottom-Left 
Top-Right 
Bottom-Right
5.Press 
to highlight Timer Counting Direction and select your desired counting direction by pressing 
/ 
.
Selection | Description |
Count Up | Increases from 0 to the preset time. |
|
|
Count Down | Decrease from the preset time to 0. |
|
|
6.To activate the presentation timer, press 
and press 
/ 
to select On and press
MODE/ENTER.
7.A confirmation message displays. Highlight Yes and press MODE/ENTER to confirm. You will see the message “Timer is On” displaying on the screen. The timer starts counting at the time the timer is on.
Operation 39