Please refer to the illustration to the right for how the colors relate to each other.
For example, if you select Red and set its
range at 0, only pure red in the projected REDYellow GREEN picture will be selected. Increasing its range
will include red close to yellow and red close to magenta.
5. | Press | to highlight Saturation and adjust | Magenta | Cyan |
|
|
its values to your preference by pressing 
/
. Every adjustment made will reflect toBLUE the image immediately.
For example, if you select Red and set its
value at 0, only the saturation of pure red will be affected.
Saturation is the amount of that color in a video picture. Lower settings produce less saturated colors; a setting of “0” removes that color from the image entirely. If the saturation is too high, that color will be overpowering and unrealistic.
6.Press 
to highlight Gain and adjust its values to your preference by pressing 
/
. The contrast level of the primary color you select will be affected. Every adjustment made will reflect to the image immediately.
7.Repeat steps 3 to 6 for other color adjustments.
8.Make sure you have made all of the desired adjustments.
9.Press MENU/EXIT to exit and save the settings.
Resetting current or all picture modes
1.Go to the PICTURE menu and highlight Reset Picture Settings.
2.Press MODE/ENTER and press 
/
to select Current or All.
•Current: returns current picture mode to the factory preset settings.
•All: returns all settings, except User 1/User 2 in the PICTURE menu to the factory preset settings.
38 Operation