BenQ CP120 Remote control description, Turns the projector on or off, Down on the remote control

Page 18

Remote control description

1

2

3

4

5

3

6

7

8

9

10

11

12

13

14

15

1.Power (Refer to "Start up" on page 21 and "Shutdown" on page 27 for more infor- mation)

Turns the projector on or off.

When the projector is in standby, press once to turn the projector on. When the projector is on, press twice to switch the projector to standby.

2.Freeze

The image is frozen when Freeze is pressed. An icon " " will display in the lower right corner of the screen.

To release the function, press Freeze again or the Source button.

3.5Up,6Down

4.3Left, 4Right

When the on-screen menu is activated, the Up/Down/Left/Right buttons are used as directional arrows to select the desired menu items and to make adjustments.

5.Menu (Refer to "Using the menus" on page 37 for more information.) Turns on the On-Screen Display (OSD) menu.

6.Auto keystone

Automatically corrects distorted images resulting from an angled projection.

7. Keystone (Refer to "Correcting keystone" on page 25 for more information.) Manually corrects distorted images resulting from an angled projection.

8.Page Up and Down

You can operate your display software program (on a connected PC) which responds to page up/down commands (like Microsoft PowerPoint) by pressing Page Up and Page

Down on the remote control.

9.Wireless

Press this button to display the Wireless Connection menu.

10.Swap (Refer to "Making wireless presentation" on page 30 for more information.) When the Wireless Connection menu is displayed, press this button to change the wireless connection mode between 802.11 a and 802.11 b/g.

10 Introduction

Image 18

Contents Welcome Copyright DisclaimerSoftware license agreement Copyright Memo Table of Contents Fine-tuning the image size and clarity Iv Table of ContentsDimensions Timing chart Table of ContentsMemo Vi Table of Contents Important safety instructions But could fail if power cuts or surgesImportant safety instructions Safety instructions Bedding or any other soft surface Do not block the ventilation holesFollowing environments Do not place this unit on a blanket Other itemSafety instructions Projector features IntroductionIntroduction Shipping contents Rear side Projector exterior viewFront / Upper side Lower sideControls and functions External control panelTurns the projector on or off Introduction Adjusts the focus of the projected image Press this button to display the Wireless Connection menu Remote control descriptionDown on the remote control Turns the projector on or offRemote control effective range Installing or replacing the remote control batteryObtaining a preferred projected image size Positioning your projectorChoosing a location EquipmentSelect your screen size Positioning your projector Screen size chart Maximum Minimum ZoomScreen Center of lens Projection distance Connecting a computer ConnectionConnection Connecting Video source devices Best video qualityConnecting a Component Video source device Component Video to VGA D-Sub adaptor cable DeviceConnecting an S-Video source device Video cable DeviceConnecting a composite Video source device Using the projector Using the projectorSwitch all of the connected equipment on Start upUtilizing the password function To set a passwordIf you forget the password To enter the password recall procedureTo change the password Fine-tuning the image size and clarity Adjusting the heightAuto-adjusting the image That you need using the zoom ring Focus ringCorrecting keystone Manual keystone correctionRight buttons on Hiding the image Selecting an application modeSwitching input signal Automatic keystone correctionFreezing the image Disconnect the power cord from the wall socketRemote paging operations ShutdownUsing the wireless functions About wireless connection modes and channelsHardware and software requirements Preparing your computer for wireless connection Checking the TCP/IP settings of your computerMaking wireless presentation Installing Wireless WizardClick to select a wireless network card from the list Current wireless connection channel Page Controlling presentation Freezing imageDisconnecting Method 2 Projector controlMenu operation Menu systemUsing the menus Picture menu Color Temp Selected Application ModeKeystone Depends onPro-Picture menu Setting menu Advance menu Economic Turned off. Selecting Off disables this functionAuto Off Off Periods of time 10hours without shutdownInformation Menu ResolutionMode Equivalent SourceMaintenance Care of the projectorCalculation of lamp hour Message StatusReplacing the lamp Temperature information Resetting the lamp counterStand-by mode IndicatorsProjector needs to cool after the power is Turned off Powering upMaintenance No picture TroubleshootingProjector does not turn on Image is unstableConfigured Remote control does not workUnable to use wireless connection NearbySpecifications Projector specificationsHorizontal Vertical Pixel Resolution Frequency Mode KHz MHz DimensionsTiming chart Supported timing for PC inputSignal Format Horizontal Frequency Vertical Frequency KHz Supported timing for Component-YPbPrInputSupported timing for Video and S-Video inputs Warranty Limited warrantyWarranty EEC statement Regulation statementsFCC statement MIC statementMemo Regulation statements