BenQ CP120 manual Setting menu

3. Setting menu

Function	Description
(default setting/
value)
OSD Time (10)	Sets the length of time the OSD will remain active after your last button
	press. The range is from 5 to 100 seconds.
Quick Cooling	Enables or disables the Quick Cooling function. Selecting On enables
(On)	the function and projector cooling time will be shortened from a
	normal 90-second duration to approximately 30 seconds.
	This is a selectable function. Selecting On limits use of the projector to
	only those who know the correct password. When the function is
	activated for the first time, you have to set a password for it. For more
	information, refer to "Utilizing the password function" on page 22.
	Once the password is set and this function is selected, the projector is
	password-protected. Users who do not know the correct password can
	not use the projector.
Password (off)		WARNING: You will be inconvenienced if you activate the password
		functionality and subsequently forget the password.
		If viewing online, print out this manual and write the password you
		used in this manual, and keep it in a safe place for later recall.
	The password can be entered by using either the buttons on the
	projector or the remote control.
		The password will display on-screen when being input.
Change	You will be asked to enter the current password before changing to a
	new one. For more information, refer to "Utilizing the password
Password
	function" on page 22.

Returns all settings to the factory preset values.

Reset	The following settings will still remain: Mirror, Language and
	Password.

Using the projector 41