3M X75 manual Connecting your devices, About Plug-and-Play capability

Page 10

Setting up

Connecting your devices

CAUTION ►Turn off all devices prior to connecting them to the projector. Attempting to connect a live device to the projector may generate extremely loud noises or other abnormalities that may result in malfunction and/or damage to the device and/or projector

►Use the accessory cable or a designated-type cable for the connection. Some cables have to be used with core set. A too long cable may cause a certain picture degradation. Please consult with your dealer for details. For cables that have a core only at one end, connect the core to the projector.

►Make sure that you connect devices to the correct port. Incorrect connection may result in malfunction and/or damage to the device and/or projector.

NOTE • Whenever attempting to connect a laptop computer to the projector, be sure to activate the laptop’s RGB external image output (set the laptop to CRT display or to simultaneous LCD and CRT display). For details on how this is done, please refer to the instruction manual of the corresponding laptop computer.

Secure the screws on the connectors and tighten.

Some computers may have multiple display screen modes. Use of some of these modes will not be possible with this projector.

For some RGB signal modes, the optional Mac adapter is necessary.

When the image resolution is changed on a computer, depending on an input, automatic adjust function may take some time and may not be completed. In this case, you may not be able to see a check box to select “Yes/No” for the new resolution on Windows. Then the resolution will go back to the original. It might be recommended to use other CRT or LCD monitors to change the resolution.

About Plug-and-Play capability

Plug-and-Play is a system composed of the computer, its operating system and peripheral equipment (i.e. display devices). This projector is compatible with VESA DDC 2B. Plug-and-Play can be achieved by connecting this projector to computers that are VESA DDC (display data channel) compatible.

Please take advantage of this function by connecting the accessory RGB cable to the RGB IN1 port (DDC 2B compatible) and/or the optional DVI cable to the DVI-D port (DDC 2B compatible). Plug-and-Play may not work properly if any other type of connection is attempted.

Please use the standard drivers in your computer as this projector is a Plug-and-Play monitor.

The X75's DVI is compatible with HDCP (High-bandwidth Digital Content Protection) and therefore capable of displaying video from HDCP compatible DVD players, et al. However, if the HDCP standards are modifi ed, the X75's DVI might not be able to display video from HDCP compatible device developed in conformance to such modifi ed HDCP standards.

10

Image 10
Contents Thank you for purchasing this projector About this manualTrademark acknowledgment Contents About contents of package DVI-D port  Part namesProjector RGB IN2 port Control buttons Remote controlLaser Indicator 14 STANDBY/ONSetting up Fastening the lens capAt 43 screen ArrangementAt 169 screen Adjusting the projectors elevator About the filter cover for bottom-up use Connecting your devices About Plug-and-Play capabilityConnecting to a speaker with amplifier output Connecting to a monitor outputExamples of connection with a computer Video out Connecting power supply Laser pointer Remote controlPutting batteries Using the remote control Turning off the power Power on/offTurning on the power STANDBY/ONOperating Adjusting the volumeSelecting an input signal Temporarily muting the soundPress the ONE Touch button on the remote control. This Adjusting screen with ONE-TOUCHAdjusting the zoom and focus Selecting an aspect ratioAdjusting the position Using the automatic adjustment feature At a video signal Using the magnify feature Correcting the keystone distortionsFreezing the screen Temporarily blanking the screenOperating the computer screen Available function Remote control operationUSB mouse and keyboard control At the Easy Menu Multifunctional settingsUsing the menu function At the advanced MenuEasy Menu Aspect Mode Bright Contrast Color Tint Shrpness WhisperDescription Go To Advanced Menu Description Mirror Reset Filter Time LanguageEasy Menu NetworkPicture Menu #3 Custom  #3 Default  #2 CustomGamma High  Middle  LOW  Custom Picture MenuColor Temp Color Tint SharpnessMY Memory LOAD1  LOAD2  LOAD3  LOAD4 SAVE4 SAVE3  SAVE2  SAVE1At a video signal / no signal 43  169  Small Aspect Over Scan Position PhaseAt a RGB/DVI signal Image MenuAt a video signal Size Auto Adjust ExecuteAt a RGB signal Image MenuTV  Film  Turn OFF Video Qlty. MenuProgressive 3D-YCS Video NR Still Image  Normal  Turn OFFComponent  Scart RGB Input MenuColor Space Component Video Format DVI Auto  Ntsc  PAL  SecamInput Menu InformationNormal  Whisper Setup MenuWhisper Mirror Volume Stereo IR Remote Normal  Hinvert  Vinvert  H&VINVERTMenu Position OSD Bright Blank Screen MenuBright  Dark My Screen My Screen Lock Description Screen MenuStart UP Turn on  Turn OFFMessage No Input is Detected Sync is OUT of RangeOption Menu ONE Touch Auto Search Auto OFFOption Menu Lamp Time Filter Time ServiceFactory Reset FAN SpeedNetwork Menu IP Address Subnet Mask Default GatewayDhcp Network Menu When your network enables the Dhcp functionEx. Case of IP Address = Screen Network Menu Maintenance LampCase of replacement by yourself LampAir filter Inside of the projector Caring for the cabinet and remote controlOther care Caring for the lensThere is no input signal Time the lamp timer has counted is approaching 2000 hoursRelated messages Internal portion temperature is rising Related messagesRegarding the indicator lamps Cooling fan is not operating Regarding the indicator lampsIt is time to clean the ai r filter There is a possibility that the interior portionPower switch is not set to the on position Electrical power cord is not pluggedPhenomena that may easily be mistaken for machine defects Phenomena that may easily be mistaken for machine defects RGB input SpecificationDigital RGB input RGB outputSpecifications How to Order Accessories Part NumberNot included with Basic Packet Part Number DN00801-X75OGENG

X75 specifications

The 3M X75 is a versatile and innovative product designed to meet the demands of various industries. Known for its excellent performance, the X75 incorporates advanced technologies that provide users with superior capabilities. This article delves into its main features, technologies, and characteristics that set it apart in the marketplace.

One of the standout features of the 3M X75 is its exceptional adhesion properties. It uses a unique adhesive formulation that ensures a strong bond to a variety of surfaces. This makes it an ideal choice for applications where reliability is critical. Whether in automotive, construction, or other sectors, the X75 offers a performance that professionals can depend on.

Another key characteristic of the 3M X75 is its durability. The product is engineered to withstand harsh environmental conditions, including extreme temperatures, moisture, and UV exposure. This resilience makes it suitable for both indoor and outdoor applications, ensuring that it maintains its integrity over time.

Additionally, the technology behind the 3M X75 includes a pressure-sensitive adhesive that provides immediate bond strength upon application. This allows users to work efficiently without waiting for curing times, which can slow down workflows. The quick application process is complemented by the product's easy handling, making it user-friendly for various projects.

The design of the 3M X75 also emphasizes flexibility. It can be adapted for different applications, ranging from automotive parts to signage and displays. Its ability to conform to uneven surfaces expands its usability, making it a go-to solution for a plethora of projects.

Another notable feature is its clean removal capability. The 3M X75 is designed to peel away cleanly from surfaces without leaving any residue behind, which is crucial for anyone looking to maintain a neat working environment.

In summary, the 3M X75 stands out due to its superior adhesion, durability, pressure-sensitive technology, flexibility, and clean removal attributes. These characteristics make it a reliable and versatile choice for professionals across various industries, enhancing productivity and ensuring high-quality results for any application.