3M X75 manual Phenomena that may easily be mistaken for machine defects

Page 52

Troubleshooting

Phenomena that may easily be mistaken for machine defects

WARNING ► Never use the projector if abnormal operations such as

smoke, strange odor, excessive sound, damaged casing or elements or cables,

penetration of liquids or foreign matter, etc. should occur. In such cases, immediately turn off the power switch and then disconnect the power plug from the power outlet. After making sure that the smoke or odor has stopped, contact

your dealer or service company.

1. Before requesting repair, please check in accordance with the following chart. This operation sometimes resolves your problem.

If the situation cannot be corrected,

2. The projector’s microprocessor may need to be reset. Please push the Restart switch by using a cocktail stick or similar and the projector will restart.

3. Some setting may be wrong. Please use the FACTORY RESET function of SERVICE menu in the OPTION menu (39) to reset all settings to factory

default.

Then, if the problem is not removed after maintenance, please contact your dealer or service company.

Phenomenon

Cases not involving a machine defect

Reference

page

 

 

 

The electrical power cord is not plugged in.

13

 

Correctly connect the power cord.

 

 

 

The power switch is not set to the on position.

16

 

Set the power switch to [ ] (On).

 

 

Power does not

come on.

The main power source has been interrupted during operation such as by a power outage (blackout), etc.

Please turn the power off, and allow the unit to cool down at least 20 minutes. After the projector has suffi ciently cooled down, please turn the power on again.

Either there is no lamp and/or lamp door, or either of these has not been properly fixed.

Please turn the power off, and allow the unit to cool down at least 45 minutes. After the projector has suffi ciently cooled down, please make confi rmation of the attachment state of the lamp and lamp door, and then turn the power on again.

16

44, 45

52

Image 52
Contents Thank you for purchasing this projector About this manualTrademark acknowledgment Contents About contents of package Part names ProjectorDVI-D port  RGB IN2 port Remote control Laser Indicator 14Control buttons STANDBY/ONSetting up Fastening the lens capAt 43 screen ArrangementAt 169 screen Adjusting the projectors elevator About the filter cover for bottom-up use Connecting your devices About Plug-and-Play capabilityConnecting to a speaker with amplifier output Connecting to a monitor outputExamples of connection with a computer Video out Connecting power supply Laser pointer Remote controlPutting batteries Using the remote control Power on/off Turning on the powerTurning off the power STANDBY/ONAdjusting the volume Selecting an input signalOperating Temporarily muting the soundAdjusting screen with ONE-TOUCH Adjusting the zoom and focusPress the ONE Touch button on the remote control. This Selecting an aspect ratioAdjusting the position Using the automatic adjustment feature At a video signal Using the magnify feature Correcting the keystone distortionsFreezing the screen Temporarily blanking the screenOperating the computer screen Available function Remote control operationUSB mouse and keyboard control Multifunctional settings Using the menu functionAt the Easy Menu At the advanced MenuEasy Menu Aspect Mode Bright Contrast Color Tint Shrpness WhisperDescription Mirror Reset Filter Time Language Easy MenuGo To Advanced Menu Description NetworkPicture Menu #3 Custom  #3 Default  #2 CustomGamma Picture Menu Color TempHigh  Middle  LOW  Custom Color Tint SharpnessMY Memory LOAD1  LOAD2  LOAD3  LOAD4 SAVE4 SAVE3  SAVE2  SAVE1Aspect Over Scan Position Phase At a RGB/DVI signalAt a video signal / no signal 43  169  Small Image MenuSize Auto Adjust Execute At a RGB signalAt a video signal Image MenuVideo Qlty. Menu Progressive 3D-YCS Video NRTV  Film  Turn OFF Still Image  Normal  Turn OFFInput Menu Color Space Component Video Format DVIComponent  Scart RGB Auto  Ntsc  PAL  SecamInput Menu InformationSetup Menu Whisper Mirror Volume Stereo IR RemoteNormal  Whisper Normal  Hinvert  Vinvert  H&VINVERTMenu Position OSD Bright Blank Screen MenuBright  Dark Screen Menu Start UPMy Screen My Screen Lock Description Turn on  Turn OFFMessage No Input is Detected Sync is OUT of RangeOption Menu ONE Touch Auto Search Auto OFFLamp Time Filter Time Service Factory ResetOption Menu FAN SpeedNetwork Menu IP Address Subnet Mask Default GatewayDhcp Network Menu When your network enables the Dhcp functionEx. Case of IP Address = Screen Network Menu Maintenance LampCase of replacement by yourself LampAir filter Caring for the cabinet and remote control Other careInside of the projector Caring for the lensThere is no input signal Time the lamp timer has counted is approaching 2000 hoursRelated messages Internal portion temperature is rising Related messagesRegarding the indicator lamps Regarding the indicator lamps It is time to clean the ai r filterCooling fan is not operating There is a possibility that the interior portionPower switch is not set to the on position Electrical power cord is not pluggedPhenomena that may easily be mistaken for machine defects Phenomena that may easily be mistaken for machine defects Specification Digital RGB inputRGB input RGB outputSpecifications How to Order Accessories Part NumberNot included with Basic Packet Part Number DN00801-X75OGENG

X75 specifications

The 3M X75 is a versatile and innovative product designed to meet the demands of various industries. Known for its excellent performance, the X75 incorporates advanced technologies that provide users with superior capabilities. This article delves into its main features, technologies, and characteristics that set it apart in the marketplace.

One of the standout features of the 3M X75 is its exceptional adhesion properties. It uses a unique adhesive formulation that ensures a strong bond to a variety of surfaces. This makes it an ideal choice for applications where reliability is critical. Whether in automotive, construction, or other sectors, the X75 offers a performance that professionals can depend on.

Another key characteristic of the 3M X75 is its durability. The product is engineered to withstand harsh environmental conditions, including extreme temperatures, moisture, and UV exposure. This resilience makes it suitable for both indoor and outdoor applications, ensuring that it maintains its integrity over time.

Additionally, the technology behind the 3M X75 includes a pressure-sensitive adhesive that provides immediate bond strength upon application. This allows users to work efficiently without waiting for curing times, which can slow down workflows. The quick application process is complemented by the product's easy handling, making it user-friendly for various projects.

The design of the 3M X75 also emphasizes flexibility. It can be adapted for different applications, ranging from automotive parts to signage and displays. Its ability to conform to uneven surfaces expands its usability, making it a go-to solution for a plethora of projects.

Another notable feature is its clean removal capability. The 3M X75 is designed to peel away cleanly from surfaces without leaving any residue behind, which is crucial for anyone looking to maintain a neat working environment.

In summary, the 3M X75 stands out due to its superior adhesion, durability, pressure-sensitive technology, flexibility, and clean removal attributes. These characteristics make it a reliable and versatile choice for professionals across various industries, enhancing productivity and ensuring high-quality results for any application.