3M X75 manual Phenomena that may easily be mistaken for machine defects

Page 53

Troubleshooting

Phenomena that may easily be mistaken for machine defects (continued)

Phenomenon

No pictures are displayed.

Cases not involving a machine defect

Reference

page

 

The lens cap is attached.

4, 16

Remove the lens cap

 

The signal cables are not correctly connected.

10, 11,

Correctly connect the connection cables.

12

The brightness is adjusted to an extremely low level.

 

Adjust the BRIGHT to a higher level using the menu function

24, 26

or the remote control

Colors have a

faded- out

appearance, or

Color tone is

poor.

The computer cannot detect the projector as a plug

 

and play monitor.

10,11,

Make sure that the computer’s can detect a plug and play

12

monitor using other plug and play monitor.

 

Color settings are not correctly adjusted.

 

Perform picture adjustments by changing the COLOR

24 , 27,

TEMP, COLOR TINT and/or COLOR SPAC E settings,

32

using the menu functions.

 

COLOR SPACE setting is not suitable.

 

Change the COLOR SPACE setting to AUTO, RGB,

32

SMPTE240, REC709 or REC601.

The brightness and/or contrast are adjusted to an extremely low level.

Adjust the BRIGHT and/or CONTRAST settings to a higher level using the menu function.

Pictures appear The WHISPER function is working.

dark. Select the NORMAL to the item WHISPER in the SETUP

menu.

24 , 26

24, 34

Pictures appear

blurry.

The lamp is approaching the end of its product lifetime.

Replace the lamp.

Either the focus and/or horizontal phase settings are not properly.

Adjust the focus using the focus ring , and/or H PHASE using the menu function.

The lens is dirty or misty.

Clean the lens by referring to the section “Caring for the

lens”.

44 , 45

18, 29

47

NOTE • Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and such do not constitute or imply a machine defect.

53

Page 52 Page 54
Image 53
Page 52 Page 54
Contents Trademark acknowledgment About this manualThank you for purchasing this projector Contents About contents of package Projector Part namesDVI-D port  RGB IN2 port Laser Indicator 14 Remote controlControl buttons STANDBY/ONFastening the lens cap Setting upAt 169 screen ArrangementAt 43 screen Adjusting the projectors elevator About the filter cover for bottom-up use About Plug-and-Play capability Connecting your devicesExamples of connection with a computer Connecting to a monitor outputConnecting to a speaker with amplifier output Video out Connecting power supply Putting batteries Remote controlLaser pointer Using the remote control Turning on the power Power on/offTurning off the power STANDBY/ONSelecting an input signal Adjusting the volumeOperating Temporarily muting the soundAdjusting the zoom and focus Adjusting screen with ONE-TOUCHPress the ONE Touch button on the remote control. This Selecting an aspect ratio At a video signal Using the automatic adjustment featureAdjusting the position Correcting the keystone distortions Using the magnify featureTemporarily blanking the screen Freezing the screenUSB mouse and keyboard control Available function Remote control operationOperating the computer screen Using the menu function Multifunctional settingsAt the Easy Menu At the advanced MenuDescription Aspect Mode Bright Contrast Color Tint Shrpness WhisperEasy Menu Easy Menu Mirror Reset Filter Time LanguageGo To Advanced Menu Description NetworkGamma #3 Custom  #3 Default  #2 CustomPicture Menu Color Temp Picture MenuHigh  Middle  LOW  Custom Color Tint SharpnessLOAD1  LOAD2  LOAD3  LOAD4 SAVE4 SAVE3  SAVE2  SAVE1 MY MemoryAt a RGB/DVI signal Aspect Over Scan Position PhaseAt a video signal / no signal 43  169  Small Image MenuAt a RGB signal Size Auto Adjust ExecuteAt a video signal Image MenuProgressive 3D-YCS Video NR Video Qlty. MenuTV  Film  Turn OFF Still Image  Normal  Turn OFFColor Space Component Video Format DVI Input MenuComponent  Scart RGB Auto  Ntsc  PAL  SecamInformation Input MenuWhisper Mirror Volume Stereo IR Remote Setup MenuNormal  Whisper Normal  Hinvert  Vinvert  H&VINVERTBright  Dark Screen MenuMenu Position OSD Bright Blank Start UP Screen MenuMy Screen My Screen Lock Description Turn on  Turn OFFNo Input is Detected Sync is OUT of Range MessageONE Touch Auto Search Auto OFF Option MenuFactory Reset Lamp Time Filter Time ServiceOption Menu FAN SpeedDhcp IP Address Subnet Mask Default GatewayNetwork Menu Ex. Case of IP Address = When your network enables the Dhcp functionNetwork Menu Screen Network Menu Lamp MaintenanceLamp Case of replacement by yourselfAir filter Other care Caring for the cabinet and remote controlInside of the projector Caring for the lensRelated messages Time the lamp timer has counted is approaching 2000 hoursThere is no input signal Related messages Internal portion temperature is risingRegarding the indicator lamps It is time to clean the ai r filter Regarding the indicator lampsCooling fan is not operating There is a possibility that the interior portionPhenomena that may easily be mistaken for machine defects Electrical power cord is not pluggedPower switch is not set to the on position Phenomena that may easily be mistaken for machine defects Digital RGB input SpecificationRGB input RGB outputSpecifications Not included with Basic Packet Part Number Accessories Part NumberHow to Order DN00801-X75OGENG

X75 specifications

The 3M X75 is a versatile and innovative product designed to meet the demands of various industries. Known for its excellent performance, the X75 incorporates advanced technologies that provide users with superior capabilities. This article delves into its main features, technologies, and characteristics that set it apart in the marketplace.

One of the standout features of the 3M X75 is its exceptional adhesion properties. It uses a unique adhesive formulation that ensures a strong bond to a variety of surfaces. This makes it an ideal choice for applications where reliability is critical. Whether in automotive, construction, or other sectors, the X75 offers a performance that professionals can depend on.

Another key characteristic of the 3M X75 is its durability. The product is engineered to withstand harsh environmental conditions, including extreme temperatures, moisture, and UV exposure. This resilience makes it suitable for both indoor and outdoor applications, ensuring that it maintains its integrity over time.

Additionally, the technology behind the 3M X75 includes a pressure-sensitive adhesive that provides immediate bond strength upon application. This allows users to work efficiently without waiting for curing times, which can slow down workflows. The quick application process is complemented by the product's easy handling, making it user-friendly for various projects.

The design of the 3M X75 also emphasizes flexibility. It can be adapted for different applications, ranging from automotive parts to signage and displays. Its ability to conform to uneven surfaces expands its usability, making it a go-to solution for a plethora of projects.

Another notable feature is its clean removal capability. The 3M X75 is designed to peel away cleanly from surfaces without leaving any residue behind, which is crucial for anyone looking to maintain a neat working environment.

In summary, the 3M X75 stands out due to its superior adhesion, durability, pressure-sensitive technology, flexibility, and clean removal attributes. These characteristics make it a reliable and versatile choice for professionals across various industries, enhancing productivity and ensuring high-quality results for any application.
Top Page Image Contents