3M X75 manual Image Menu, Aspect Over Scan Position Phase, At a RGB/DVI signal

Multifunctional settings

IMAGE Menu

With the IMAGE menu, items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table.

MENU [RGB]	:SELECT
PICTURE	ASPECT         4:3
IMAGE	OVER SCAN      95
VIDEO Qlty.  V POSITION     25
INPUT	H POSITION     142
SETUP	H PHASE        16
SCREEN	H SIZE         1344
OPTION	AUTO ADJUST EXECUTE
NETWORK
EASY MENU

Item

ASPECT

OVER SCAN

VPOSITION

H POSITION

H PHASE

Description

Using the buttons ▲/▼ switches the mode for aspect ratio.

At a RGB/DVI signal

4:3  16:9  NORMAL

At a video signal / no signal 4:3  16:9  SMALL

•The NORMAL mode keeps the original aspect ratio of the signal.

•At a HDTV signal of 1125i (1080i) or 750p (720p) of COMPONENT VIDEO input, this item can't be selected.

•Performing the automatic adjustment initializes the aspect ratio setting.

Using the buttons ▲/▼ adjusts the over-scan ratio. Large (It reduces picture)  Small (It magnifi es picture)

•This item can be selected only at a video signal.

•When this adjustment is too large, certain degradation may appear at the frame area of the picture. In such a case, please adjust small.

Using the buttons ▲/▼ adjusts the vertical position.

Up  Down

This item is not selected when DVI-D input port is selected.

Using the buttons ▲/▼ adjusts the horizontal position.

Left  Right

This item is not selected when DVI-D input port is selected.

Using the buttons ▲/▼ adjusts the horizontal phase to eliminate fl icker.

Right  Left

•This item can be selected only at a RGB signal or a component video signal. Note that this does not work with the input signal of 525i(480i)/625i(576i) from the component video port.

29