3M X75 manual Picture Menu, #3 Custom  #3 Default  #2 Custom, Gamma

Multifunctional settings

PICTURE Menu

With the PICTURE menu, items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table.

MENU [RGB]	:SELECT
PICTURE	BRIGHT         ＋0
IMAGE	CONTRAST       ＋0
VIDEO Qlty.  GAMMA        DEFAULT 1
INPUT	COLOR TEMP   6500K
SETUP	COLOR           +0
SCREEN	TINT            +0
OPTION	SHARPNESS       +0
NETWORK	MY MEMORY    SAVE 1
EASY MENU

Item	Description
BRIGHT	Using the buttons ▲/▼ adjusts the brightness. :	Light  Dark
CONTRAST	Using the buttons ▲/▼ adjusts the contrast. :	Strong  Weak

Using the buttons ▲/▼ switches the GAMMA mode. #1 DEFAULT  #1 CUSTOM  #2 DEFAULT

#3 CUSTOM  #3 DEFAULT  #2 CUSTOM

To adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOM

	Selecting a mode of CUSTOM and then
	pressing the button ► or the ENTER button
	displays a dialog to aid you in adjusting the
	mode.
	This function is useful when you want to
	change the brightness of particular tones.
	Choose an item using the buttons ◄/►, and
GAMMA	adjust the level using the buttons ▲/▼.

ENTER :

1 2 3 4 5 6 7 8

+0 +0 +0 +0 +0 +0 +0 +0 GAMMA [CUSTOM 1]

Yu can display a test pattern for checking the effect of your adjustment by pressing the ENTER button.

Each time you press the ENTER button, the pattern changes as below.

No pattern  Gray scale of 9 steps

Ramp  Gray scale of 15 steps

Eight of equalizing bars corresponds to eight of tone level of test pattern except the darkest in the left end. If you want to adjust the 2nd tone from left end on the test pattern, use the equalizing adjustment bar “1”. The darkest tone at the left end of the test pattern cannot be controlled with any of equalizing adjustment bar.

•When this function is performed, a certain extra such as a line may appear.

26