3M X75 manual Air filter

Page 46
Filter cover’s claws
Filter cover
Air fi lter’s knob
Air fi lter

Maintenance

Air filter

WARNING ► Before caring, make sure the power switch is off and the power cable is not plugged in, then allow the projector to cool suffi ciently The care in a high temperature state of the projector could cause a burn and/or malfunction to the projector

►Use only the air fi lter of the specifi ed type. Do not use the projector with the air fi lter and fi lter cover removed.

►Avoid wetting the projector or inserting liquids in the projector. It could result in a fi re, an electric shock, and/or malfunction to the projector

CAUTION ►Please replace the air fi lter when it is damaged or too soiled, and also when you replace the lamp.

When the indicators or a message prompts you to clean the air fi lter, clean the air fi lter as soon as possible. If the air fi lter becomes clogged by dust or the like, internal temperatures rise and the power may be automatically turned off for malfunction prevention.

1. Turn the projector off, and unplug the power cord. Allow the projector to cool for at least 45 minutes. And

prepare a vacuum cleaner.

2. After making sure that the projector is cool adequately, slowly turn the projector so that the lens-side is facing up. Please be careful for a projector not to fall. While the

projector is placed lens-side up, hold the projector.

3. Unhooking the fi lter cover’s claws, pull the fi lter cover in the direction of the arrow to remove it.

4. Holding the air fi lter’s knob, pull the air fi lter off.

5. Apply a vacuum cleaner to the vent of the projector for the

air fi lter. And then slowly turn the projector bottom up.

6. Apply a vacuum cleaner to the air fi lter and fi lter cover. Please replace the air fi lter when it is damaged or too soiled.

To prepare a new air fi lter, contact your dealer and tell the air fi lter type number = 78-8118-9505-7

An air fi lter of specifi ed type will come even with the replacement lamp for this projector.

7. Position the cleaned air fi lter or a new air fi lter into place, and push the points of "PUSH" word with claws to fi x the air fi lter.

8. Replace the fi lter cover and snap it back into place.

9. Slowly turn the projector so that the top is facing up.

10. Turn the projector on, and reset the fi lter time using the FILTER TIME function of OPTION menu ( 39)

NOTE • Incorrectly resetting of the fi lter timer (resetting without replacement, or neglect of resetting after replacement) will result in incorrect message functions.

46

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Thank you for purchasing this projector About this manualTrademark acknowledgment Contents About contents of package DVI-D port  Part namesProjector RGB IN2 port Control buttons Remote controlLaser Indicator 14 STANDBY/ONSetting up Fastening the lens capAt 43 screen ArrangementAt 169 screen Adjusting the projectors elevator About the filter cover for bottom-up use Connecting your devices About Plug-and-Play capabilityConnecting to a speaker with amplifier output Connecting to a monitor outputExamples of connection with a computer Video out Connecting power supply Laser pointer Remote controlPutting batteries Using the remote control Turning off the power Power on/offTurning on the power STANDBY/ONOperating Adjusting the volumeSelecting an input signal Temporarily muting the soundPress the ONE Touch button on the remote control. This Adjusting screen with ONE-TOUCHAdjusting the zoom and focus Selecting an aspect ratioAdjusting the position Using the automatic adjustment feature At a video signal Using the magnify feature Correcting the keystone distortionsFreezing the screen Temporarily blanking the screenOperating the computer screen Available function Remote control operationUSB mouse and keyboard control At the Easy Menu Multifunctional settingsUsing the menu function At the advanced MenuEasy Menu Aspect Mode Bright Contrast Color Tint Shrpness WhisperDescription Go To Advanced Menu Description Mirror Reset Filter Time LanguageEasy Menu NetworkPicture Menu #3 Custom  #3 Default  #2 CustomGamma High  Middle  LOW  Custom Picture MenuColor Temp Color Tint SharpnessMY Memory LOAD1  LOAD2  LOAD3  LOAD4 SAVE4 SAVE3  SAVE2  SAVE1At a video signal / no signal 43  169  Small Aspect Over Scan Position PhaseAt a RGB/DVI signal Image MenuAt a video signal Size Auto Adjust ExecuteAt a RGB signal Image MenuTV  Film  Turn OFF Video Qlty. MenuProgressive 3D-YCS Video NR Still Image  Normal  Turn OFFComponent  Scart RGB Input MenuColor Space Component Video Format DVI Auto  Ntsc  PAL  SecamInput Menu InformationNormal  Whisper Setup MenuWhisper Mirror Volume Stereo IR Remote Normal  Hinvert  Vinvert  H&VINVERTMenu Position OSD Bright Blank Screen MenuBright  Dark My Screen My Screen Lock Description Screen MenuStart UP Turn on  Turn OFFMessage No Input is Detected Sync is OUT of RangeOption Menu ONE Touch Auto Search Auto OFFOption Menu Lamp Time Filter Time ServiceFactory Reset FAN SpeedNetwork Menu IP Address Subnet Mask Default GatewayDhcp Network Menu When your network enables the Dhcp functionEx. Case of IP Address = Screen Network Menu Maintenance LampCase of replacement by yourself LampAir filter Inside of the projector Caring for the cabinet and remote controlOther care Caring for the lensThere is no input signal Time the lamp timer has counted is approaching 2000 hoursRelated messages Internal portion temperature is rising Related messagesRegarding the indicator lamps Cooling fan is not operating Regarding the indicator lampsIt is time to clean the ai r filter There is a possibility that the interior portionPower switch is not set to the on position Electrical power cord is not pluggedPhenomena that may easily be mistaken for machine defects Phenomena that may easily be mistaken for machine defects RGB input SpecificationDigital RGB input RGB outputSpecifications How to Order Accessories Part NumberNot included with Basic Packet Part Number DN00801-X75OGENG

X75 specifications

The 3M X75 is a versatile and innovative product designed to meet the demands of various industries. Known for its excellent performance, the X75 incorporates advanced technologies that provide users with superior capabilities. This article delves into its main features, technologies, and characteristics that set it apart in the marketplace.

One of the standout features of the 3M X75 is its exceptional adhesion properties. It uses a unique adhesive formulation that ensures a strong bond to a variety of surfaces. This makes it an ideal choice for applications where reliability is critical. Whether in automotive, construction, or other sectors, the X75 offers a performance that professionals can depend on.

Another key characteristic of the 3M X75 is its durability. The product is engineered to withstand harsh environmental conditions, including extreme temperatures, moisture, and UV exposure. This resilience makes it suitable for both indoor and outdoor applications, ensuring that it maintains its integrity over time.

Additionally, the technology behind the 3M X75 includes a pressure-sensitive adhesive that provides immediate bond strength upon application. This allows users to work efficiently without waiting for curing times, which can slow down workflows. The quick application process is complemented by the product's easy handling, making it user-friendly for various projects.

The design of the 3M X75 also emphasizes flexibility. It can be adapted for different applications, ranging from automotive parts to signage and displays. Its ability to conform to uneven surfaces expands its usability, making it a go-to solution for a plethora of projects.

Another notable feature is its clean removal capability. The 3M X75 is designed to peel away cleanly from surfaces without leaving any residue behind, which is crucial for anyone looking to maintain a neat working environment.

In summary, the 3M X75 stands out due to its superior adhesion, durability, pressure-sensitive technology, flexibility, and clean removal attributes. These characteristics make it a reliable and versatile choice for professionals across various industries, enhancing productivity and ensuring high-quality results for any application.
Top Page Image Contents