3M X75 manual Related messages, Time the lamp timer has counted is approaching 2000 hours

Page 48

Troubleshooting

Troubleshooting

Related messages

When the unit's power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below. If the same message is displayed after the treatment, or if a message other than the following appears, please contact your dealer or service

company.

Although these messages will be automatically disappeared around several minutes, it will be reappeared every time the power is turned on.

Message

CHANGE THE LAMP

AFTER REPLACING LAMP, RESET THE LAMP TIMER.

CHANGE THE LAMP

AFTER REPLACING LAMP, RESET THE LAMP TIMER.

THE POWER WILL TURN OFF

AFTER ** hr.

CHANGE THE LAMP

AFTER REPLACING LAMP, RESET THE LAMP TIMER.

THE POWER WILL TURN OFF

AFTER 0 hr.

Description

The time the lamp timer has counted is approaching 2000 hours.

Preparation of a new lamp, and an early lamp change is recommended. After you have change the lamp, please be sure to reset the lamp timer(39).

The time the lamp timer has counted is approaching 2000 hours, so a lamp change within ** hours is recommended.

When lamp usage reaches 2000 hours, the power will automatically be turned off. Please change the lamp by referring to the section “Lamp”. After you have changed the lamp, please be sure to reset the lamp timer(39).

As the time the lamp timer has counted has reached 2000 hours, the power will soon be automatically turned off.

Please immediately turn the power off, and change the lamp by referring to the section “Lamp”. After changing the lamp, please be sure to reset the lamp timer(39).

NO INPUT IS DETECTED

ON ***

There is no input signal.

Please confi rm the signal input connection, and the status of the signal source.

SYNC IS OUT OF RANGE

ON *** fH *****kHz fV *****Hz

The horizontal or vertical wavelength of the inputted signal is outside of the response parameters of this unit.

Please confi rm the specs for this unit or the signal source

specs.

48

Image 48
Contents About this manual Thank you for purchasing this projectorTrademark acknowledgment Contents About contents of package Part names ProjectorDVI-D port  RGB IN2 port Remote control Laser Indicator 14Control buttons STANDBY/ONSetting up Fastening the lens capArrangement At 43 screenAt 169 screen Adjusting the projectors elevator About the filter cover for bottom-up use Connecting your devices About Plug-and-Play capabilityConnecting to a monitor output Connecting to a speaker with amplifier outputExamples of connection with a computer Video out Connecting power supply Remote control Laser pointerPutting batteries Using the remote control Power on/off Turning on the powerTurning off the power STANDBY/ONAdjusting the volume Selecting an input signalOperating Temporarily muting the soundAdjusting screen with ONE-TOUCH Adjusting the zoom and focusPress the ONE Touch button on the remote control. This Selecting an aspect ratioUsing the automatic adjustment feature Adjusting the position At a video signal Using the magnify feature Correcting the keystone distortionsFreezing the screen Temporarily blanking the screenAvailable function Remote control operation Operating the computer screenUSB mouse and keyboard control Multifunctional settings Using the menu functionAt the Easy Menu At the advanced MenuAspect Mode Bright Contrast Color Tint Shrpness Whisper Easy MenuDescription Mirror Reset Filter Time Language Easy MenuGo To Advanced Menu Description Network#3 Custom  #3 Default  #2 Custom Picture MenuGamma Picture Menu Color TempHigh  Middle  LOW  Custom Color Tint SharpnessMY Memory LOAD1  LOAD2  LOAD3  LOAD4 SAVE4 SAVE3  SAVE2  SAVE1Aspect Over Scan Position Phase At a RGB/DVI signalAt a video signal / no signal 43  169  Small Image MenuSize Auto Adjust Execute At a RGB signalAt a video signal Image MenuVideo Qlty. Menu Progressive 3D-YCS Video NRTV  Film  Turn OFF Still Image  Normal  Turn OFFInput Menu Color Space Component Video Format DVIComponent  Scart RGB Auto  Ntsc  PAL  SecamInput Menu InformationSetup Menu Whisper Mirror Volume Stereo IR RemoteNormal  Whisper Normal  Hinvert  Vinvert  H&VINVERTScreen Menu Menu Position OSD Bright BlankBright  Dark Screen Menu Start UPMy Screen My Screen Lock Description Turn on  Turn OFFMessage No Input is Detected Sync is OUT of RangeOption Menu ONE Touch Auto Search Auto OFFLamp Time Filter Time Service Factory ResetOption Menu FAN SpeedIP Address Subnet Mask Default Gateway Network MenuDhcp When your network enables the Dhcp function Network MenuEx. Case of IP Address = Screen Network Menu Maintenance LampCase of replacement by yourself LampAir filter Caring for the cabinet and remote control Other careInside of the projector Caring for the lensTime the lamp timer has counted is approaching 2000 hours There is no input signalRelated messages Internal portion temperature is rising Related messagesRegarding the indicator lamps Regarding the indicator lamps It is time to clean the ai r filterCooling fan is not operating There is a possibility that the interior portionElectrical power cord is not plugged Power switch is not set to the on positionPhenomena that may easily be mistaken for machine defects Phenomena that may easily be mistaken for machine defects Specification Digital RGB inputRGB input RGB outputSpecifications Accessories Part Number How to OrderNot included with Basic Packet Part Number DN00801-X75OGENG

X75 specifications

The 3M X75 is a versatile and innovative product designed to meet the demands of various industries. Known for its excellent performance, the X75 incorporates advanced technologies that provide users with superior capabilities. This article delves into its main features, technologies, and characteristics that set it apart in the marketplace.

One of the standout features of the 3M X75 is its exceptional adhesion properties. It uses a unique adhesive formulation that ensures a strong bond to a variety of surfaces. This makes it an ideal choice for applications where reliability is critical. Whether in automotive, construction, or other sectors, the X75 offers a performance that professionals can depend on.

Another key characteristic of the 3M X75 is its durability. The product is engineered to withstand harsh environmental conditions, including extreme temperatures, moisture, and UV exposure. This resilience makes it suitable for both indoor and outdoor applications, ensuring that it maintains its integrity over time.

Additionally, the technology behind the 3M X75 includes a pressure-sensitive adhesive that provides immediate bond strength upon application. This allows users to work efficiently without waiting for curing times, which can slow down workflows. The quick application process is complemented by the product's easy handling, making it user-friendly for various projects.

The design of the 3M X75 also emphasizes flexibility. It can be adapted for different applications, ranging from automotive parts to signage and displays. Its ability to conform to uneven surfaces expands its usability, making it a go-to solution for a plethora of projects.

Another notable feature is its clean removal capability. The 3M X75 is designed to peel away cleanly from surfaces without leaving any residue behind, which is crucial for anyone looking to maintain a neat working environment.

In summary, the 3M X75 stands out due to its superior adhesion, durability, pressure-sensitive technology, flexibility, and clean removal attributes. These characteristics make it a reliable and versatile choice for professionals across various industries, enhancing productivity and ensuring high-quality results for any application.