3M X75 manual Other care, Inside of the projector, Caring for the lens

Page 47

Maintenance

Other care

WARNING ►Before caring, make sure the power switch is off and the power cable is not plugged in, and then allow the projector to cool sufficiently. The care in a high temperature state of the projector could cause a burn and/or malfunction to the projector.

►Never try to care for the inside of the projector personally. Doing is so

dangerous.

►Avoid wetting the projector or inserting liquids in the projector. It could result

in a fi re, an electric shock, and/or malfunction to the projector.

Don’t put a container containing water, cleaner or chemicals near the projector.

Don’t use aerosols or sprays.

CAUTION ►Please take right care of the projector according to the following. Incorrect care could cause not only an injury but adverse influence

such as discoloration, peeling paint, etc.

►Do not use cleaner or chemicals other than those listed below.

►Do not polish or wipe with hard objects.

Inside of the projector

In order to ensure the safe use of your projector, please have it cleaned and inspected by your dealer about once every 2 years.

Caring for the lens

If the lens is fl awed, soiled or fogged, it could cause deterioration of display quality. Please take care of the lens, being cautious of the handling.

1. Turn the projector off, and unplug the power cord. Allow the projector to cool suffi ciently.

2. After making sure that the projector is cool adequately, lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch the lens

directly with your hand.

Caring for the cabinet and remote control

Incorrect care could have adverse infl uence such as discoloration, peeling paint,

etc.

1. Turn the projector off, and unplug the power cord. Allow the projector to cool suffi ciently.

2. After making sure that the projector is cool adequately, lightly wipe with gauze or a soft cloth.

If soiling is severe, dip soft cloth in water or a neutral cleaner dilute in water, and wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth.

47

Image 47
Contents Trademark acknowledgment About this manualThank you for purchasing this projector Contents About contents of package RGB IN2 port  Part namesProjector DVI-D port STANDBY/ON Remote controlLaser Indicator 14 Control buttonsFastening the lens cap Setting upAt 169 screen ArrangementAt 43 screen Adjusting the projectors elevator About the filter cover for bottom-up use About Plug-and-Play capability Connecting your devicesExamples of connection with a computer Connecting to a monitor outputConnecting to a speaker with amplifier output Video out Connecting power supply Putting batteries Remote controlLaser pointer Using the remote control STANDBY/ON Power on/offTurning on the power Turning off the powerTemporarily muting the sound Adjusting the volumeSelecting an input signal OperatingSelecting an aspect ratio Adjusting screen with ONE-TOUCHAdjusting the zoom and focus Press the ONE Touch button on the remote control. This At a video signal Using the automatic adjustment featureAdjusting the position Correcting the keystone distortions Using the magnify featureTemporarily blanking the screen Freezing the screenUSB mouse and keyboard control Available function Remote control operationOperating the computer screen At the advanced Menu Multifunctional settingsUsing the menu function At the Easy MenuDescription Aspect Mode Bright Contrast Color Tint Shrpness WhisperEasy Menu Network Mirror Reset Filter Time LanguageEasy Menu Go To Advanced Menu DescriptionGamma #3 Custom  #3 Default  #2 CustomPicture Menu Color Tint Sharpness Picture MenuColor Temp High  Middle  LOW  CustomLOAD1  LOAD2  LOAD3  LOAD4 SAVE4 SAVE3  SAVE2  SAVE1 MY MemoryImage Menu Aspect Over Scan Position PhaseAt a RGB/DVI signal At a video signal / no signal 43  169  SmallImage Menu Size Auto Adjust ExecuteAt a RGB signal At a video signalStill Image  Normal  Turn OFF Video Qlty. MenuProgressive 3D-YCS Video NR TV  Film  Turn OFFAuto  Ntsc  PAL  Secam Input MenuColor Space Component Video Format DVI Component  Scart RGBInformation Input MenuNormal  Hinvert  Vinvert  H&VINVERT Setup MenuWhisper Mirror Volume Stereo IR Remote Normal  WhisperBright  Dark Screen MenuMenu Position OSD Bright Blank Turn on  Turn OFF Screen MenuStart UP My Screen My Screen Lock DescriptionNo Input is Detected Sync is OUT of Range MessageONE Touch Auto Search Auto OFF Option MenuFAN Speed Lamp Time Filter Time ServiceFactory Reset Option MenuDhcp IP Address Subnet Mask Default GatewayNetwork Menu Ex. Case of IP Address = When your network enables the Dhcp functionNetwork Menu Screen Network Menu Lamp MaintenanceLamp Case of replacement by yourselfAir filter Caring for the lens Caring for the cabinet and remote controlOther care Inside of the projectorRelated messages Time the lamp timer has counted is approaching 2000 hoursThere is no input signal Related messages Internal portion temperature is risingRegarding the indicator lamps There is a possibility that the interior portion Regarding the indicator lampsIt is time to clean the ai r filter Cooling fan is not operatingPhenomena that may easily be mistaken for machine defects Electrical power cord is not pluggedPower switch is not set to the on position Phenomena that may easily be mistaken for machine defects RGB output SpecificationDigital RGB input RGB inputSpecifications Not included with Basic Packet Part Number Accessories Part NumberHow to Order DN00801-X75OGENG

X75 specifications

The 3M X75 is a versatile and innovative product designed to meet the demands of various industries. Known for its excellent performance, the X75 incorporates advanced technologies that provide users with superior capabilities. This article delves into its main features, technologies, and characteristics that set it apart in the marketplace.

One of the standout features of the 3M X75 is its exceptional adhesion properties. It uses a unique adhesive formulation that ensures a strong bond to a variety of surfaces. This makes it an ideal choice for applications where reliability is critical. Whether in automotive, construction, or other sectors, the X75 offers a performance that professionals can depend on.

Another key characteristic of the 3M X75 is its durability. The product is engineered to withstand harsh environmental conditions, including extreme temperatures, moisture, and UV exposure. This resilience makes it suitable for both indoor and outdoor applications, ensuring that it maintains its integrity over time.

Additionally, the technology behind the 3M X75 includes a pressure-sensitive adhesive that provides immediate bond strength upon application. This allows users to work efficiently without waiting for curing times, which can slow down workflows. The quick application process is complemented by the product's easy handling, making it user-friendly for various projects.

The design of the 3M X75 also emphasizes flexibility. It can be adapted for different applications, ranging from automotive parts to signage and displays. Its ability to conform to uneven surfaces expands its usability, making it a go-to solution for a plethora of projects.

Another notable feature is its clean removal capability. The 3M X75 is designed to peel away cleanly from surfaces without leaving any residue behind, which is crucial for anyone looking to maintain a neat working environment.

In summary, the 3M X75 stands out due to its superior adhesion, durability, pressure-sensitive technology, flexibility, and clean removal attributes. These characteristics make it a reliable and versatile choice for professionals across various industries, enhancing productivity and ensuring high-quality results for any application.