Onkyo TX-SR602/602E, TX-SR702/702E, TX-SR8260 instruction manual Initial Setup, Digital Input

TX-NR702,602_En.book Page 42 Monday, July 26, 2004 11:05 AM

First Time Setup—Continued

Initial Setup

Digital Input

If you connect a component to a digital input jack, you must assign that jack to an input selector. For example, if you connect your CD player to the OPTICAL IN2 jack, you should assign that jack to the CD input selector. By default, the OPTICAL IN1 jack is assigned to the DVD input selector, although this can be changed.

1

3

ENTER

ENTER

Use the Up and Down []/[ ] buttons to select “1. Digital Input,” and then press [ENTER].

The Digital Input menu appears.

Menu

------------------------
Basic Setup
1.Initial Setup	-
1-----------------------.Initial Setup

1.Digital Input
	1-1.Digital Input
------------------------2.Component Video
	a.DVD	:OPT1
	3.Surround Setup	:-----
	b.VIDEO1
4.Audio Adjust		:-----
	c.VIDEO2
5.Listening Mode Preset
	d.VIDEO3	:-----
6.Preference
	e.TAPE	:-----
	f.CD	:-----
	g.PHONO	:-----

2, 3

2–4

1, 5

1	Press the [RECEIVER] button fol-
RECEIVER	lowed by the [SETUP] button.
	The main menu appears onscreen.

2	Use the Up and Down [ ]/[ ]
	buttons to select “1. Initial
ENTER	Setup,” and then press [ENTER].
	The Initial Setup menu appears.

ENTER

•There are no assignments for TUNER and VIDEO 4.

4 Use the Up and Down []/[ ] buttons to select an input selec- tor, and then use the Left and

ENTER

Right []/[ ] buttons to select a digital input jack.

Examples:

If you connect your DVD player to the OPTICAL IN 2 jack, set “a. DVD” to “OPT2.”

If you want to listen to audio from the component connected to the OPTICAL IN 3 jack when the VIDEO 1 input selector is selected, set “b. VIDEO1” to “OPT3.”

If you want to listen to audio from the component connected to the COAX- IAL IN 1 jack when the VIDEO 2 input selector is selected, set “c. VIDEO2” to “COAX1.”

For input selectors that you don’t want to assign a digital input jack, leave them set to “-----.”

5	Press the [SETUP] button.
	The setup menu closes.

Note:

•This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

42