Onkyo TX-SR702/702E, TX-SR602/602E Buttons to select 2. Speaker, Speaker Setup menu appears

Page 46
1, 12
Press the [RECEIVER] button fol- lowed by the [SETUP] button. The main menu appears onscreen.
Cone diameter
2–11

TX-NR702,602_En.book Page 46 Monday, July 26, 2004 11:05 AM

First Time Setup—Continued

Speaker Setup

Some of the settings in this section are set automatically by the Automatic Speaker Setup function (see page 39). Here you can check the settings made by the Automatic Speaker Setup function, or set them manually, which is useful if you change one of the connected speakers after using the Automatic Speaker Setup function.

Speaker Configuration

2

Use the Up and Down [ ]/[ ]

 

buttons to select “2. Speaker

ENTER

Setup,” and then press [ENTER].

 

The Speaker Setup menu appears.

ENTER

This setting is set automatically by the Automatic Speaker Setup function (see page 39).

Here you can specify which speakers are connected and their individual sizes.

For speakers with a cone diameter over 6-1/2 inches (16 cm), specify large, and for those with a diameter below this, specify small.

For the TX-SR702/702E, if you’re using THX-certified speakers, spec- ify Small for all speakers.

3

ENTER

ENTER

Use the Up and Down []/[ ] buttons to select “1. Speaker Config,” and then press [ENTER]. The Speaker Config menu appears.

Menu

------------------------

 

Basic Setup

 

2.Speaker Setup

-

1-----------------------.Initial Setup

 

1.Speaker Config

 

 

 

2-1.Speaker Config

 

 

------------------------2.Speaker Distance

 

a.Subwoofer

:Yes

 

 

3.Surround Setup

 

 

 

4.Equalizer Settings

 

 

b.Front

:Large

 

 

4.Audio Adjust

:Small

 

 

c.Center

 

 

5.Listening Mode Preset

 

 

d.Surround

:Small

 

 

6.Preference

 

 

 

e.SurroundBack :Small

 

 

f.SurrBack ch

:2ch

 

 

g.Crossover

:100Hz

 

 

h.Double Bass

:Off

 

 

 

 

 

 

 

1

2, 3

1

RECEIVER

4

Use the Up and Down [ ]/[ ]

 

buttons to select “a. Subwoofer,”

and then use the Left and Right

ENTER

[]/[ ] buttons to select:

Yes: Select if a subwoofer is con- nected.

No: Select if no subwoofer is con- nected.

5

Use the Up and Down [ ]/[

]

 

buttons to select “b. Front,” and

 

then use the Left and Right [

]/

ENTER

[ ] buttons to select:

Small: Select if the front speakers are small.

Large: Select if the front speakers are large.

Note:

•If the Subwoofer setting in step 4 is set to No, this setting is fixed at Large.

46

Page 45 Page 47
Image 46
Page 45 Page 47
Contents TX-SR702/702E TX-SR602/602E TX-SR8260 Important Safety Instructions AvisFCC Information for User PrecautionsPower For Worldwide modelMake sure you have the following accessories Supplied AccessoriesPrecautions If in any doubt, consult a qualified electricianTX-SR702/702E FeaturesTX-SR702/702E, TX-SR602/602E, TX-SR8260 TX-SR602/602E, TX-SR8260Table of Contents Table of Contents TX-SR702/702E Front & Rear PanelsFront Panel TX-SR602/602E, TX-SR8260Front & Rear Panels Display Rear PanelOptical Digital 27, 28, 30, 32, 34 Component Video in 1, 2, 3 28, 30RS232 Coaxial Digital 27, 28, 30, 32, 34Video 3 in 27 Grounding screw TX-SR702/702E onlyPhono in TX-SR702/702E only Video 2 IN/OUT 30Installing the Batteries Remote ControllerUsing the Remote Controller Receiver Mode Remote ControllerRC-588M Remote Indicator Pure a button RC-591M & RC-588M only Remote Mode buttonsListening mode buttons 60 Surr button Direct buttonRemote Controller DVD Mode CD Mode Previous & Next / buttons MD/CDR ModePlay button Pause buttonStop button Tape ModeFR & FF Buttons Reverse Play buttonAbout Home Theater Enjoying Home TheaterOptical Digital Jacks Connecting the AV receiverAbout AV Connections AV Connection Color CodingConnecting the AV receiver Connecting Your SpeakersConnecting the Speaker Cables Speaker Connection PrecautionsStrip about 5/8 15 mm Connecting the AM Loop Antenna Connecting AntennaConnecting the Indoor FM Antenna Attach the FM antenna, as shown American ModelConnecting an Outdoor AM Antenna Connecting an Outdoor FM AntennaUsing a TV/FM Antenna Splitter Video Connection Formats Connecting Both Audio & VideoWhich Connections Should I Use? Audio Connection FormatsMonitor Out Connecting Your TV or ProjectorAudio Connections Your TV must also be connected via component video Connecting a DVD PlayerVideo Connections DVD playerUsing a Multichannel Connection Connecting a VCR for Playback Connecting a D-VHS VCR for PlaybackVCR recording Connecting a VCR for RecordingPlayback from the Recording VCR TV or VCR, etcPRSatellite, cable, set-top box, LD player, etc Using Optical or Coaxial ConnectionsSatellite, cable, set-top box, LD player, etc Using Analog Connections Using S-Video Connecting a Camcorder, Games Console, etcCamcorder Games console, etc Connecting a DAT, CD, or MD Connecting a CD PlayerConnecting a Cassette Recorder RecorderDigital Recording Using Optical or Coaxial Connections playback onlyDigital source DAT, CD, MD player For the TX-SR702/702E Connecting a TurntableFor the TX-SR602/602E/8260 Connecting Components Connecting a Power Amplifier TX-SR702/702E onlyWhen you start playback on an AV component con Connecting the Power Cord Connecting the Power Cords of Other ComponentsConnecting the RS232 Port Set the Power switch to the on positionFirst Time Setup Automatic Speaker SetupFirst Time Setup Main menus About the Onscreen Setup MenusSubmenus Initial Setup Digital InputButtons to select an input selec Component Video SetupComponent Video Setup menu appears Tor, and then use the LeftButtons to select b. Sp Imped Press the Receiver button fol- lowed by the Setup buttonMinimum Speaker Impedance not American models Ance Minimum, and then useTV Format Setup not American models AM Frequency Step Setup some models onlyButtons to select 2. Speaker Speaker SetupSpeaker Setup menu appears Buttons to select a. SubwooferCrossover Double Bass DefaultSpeaker Setup menu appears Speaker DistanceButtons to specify the dis- tance Speaker Distance menu appearsRepeat for all speakers Speaker Level Calibration Equalizer Setting Changing the TAPE/MD/CDR Display Repeat this step to select TAPE, MD, or CDRSource Basic OperationSelecting the Input Source Receiver button, and then use the Input Selector buttonsUsing Headphones Using the Sleep TimerSetting the Display Brightness Basic OperationInterpreting Surround Channel Values Signal format* or sampling frequencyDisplaying Source Information ReceiverListening to the Radio Using the TunerTuning into Radio Stations Use the Tuner input selectorSelecting Preset Stations Presetting Radio Stations Deleting PresetsDisplaying Radio Information Program Types Used in Europe PTY Using RDS European models onlyWhat is RDS? You can also search for radio stations by type seeListening to Traffic News TP Displaying Radio Text RTFinding Stations by Type PTY Selecting Listening Modes Selecting with the Remote ControllerSelecting on the AV receiver Multich About the Listening Modes Onkyo Original DSP Modes Using the CinemaFILTER TX-SR602/602E, TX-SR8260 only Using the Re-EQ FunctionUsing the Late Night Function Dolby Digital only Advanced OperationAdvanced Operation Adjusting Individual Speaker LevelsTo adjust the volume Lowed by the Multi CH buttonRecording Recording AudioAV Recording Recording Separate AV SourcesAnalog/PCM Advanced SetupDecoder Setup Dolby DigitalD.F ch Advanced SetupDTS MultiplexAdjusting the Bass & Treble Audio Adjust FunctionsMono PLIIx/Neo6Theater-Dimensional Assigning Listening Modes to Input SourcesUse the Up and Down Buttons to select the signal for IntelliVolume Setting PreferencesVolume Setup Remote Setup Changing the Remote Controller’s IDOSD Setup Digital FormatUsing a Receiver/Integrated Amp in Zone Using Only Speakers in ZoneZone Hardware Setup menu appears Setting the Powered ZoneButtons to select a. Powered Zone 2, and use the LeftUsing Zone Using a Multiroom Kit with a Cabinet Using the Remote Control in ZoneUsing the 12V Trigger Using a Multiroom Kit with ZoneControlling Other Components Entering Remote Control CodesSetting the MD/CDR Button to CDR Codes for Onkyo DVD PlayersResetting the Remote Controller Resetting Remote Mode ButtonsControlling Other Components DVD DVD player Remote Control CodesSAT satellite receiver CBL cable receiver ABCTX-NR702,602En.book Page 84 Monday, July 26, 2004 1105 AM TX-NR702,602En.book Page 85 Monday, July 26, 2004 1105 AM Controlling a TV Controlling a Cable ReceiverSet the VCR to On or Standby Controlling a VCR Controlling a Satellite ReceiverPress SAT first CH +Learning Commands from Another Remote Controller Making Macros Using MacrosRunning Macros Troubleshooting Troubleshooting Can’t record? Remote controller doesn’t work?Can’t control other components? Zone 2 has turned off?Speaker distance cannot be set as required? Sound changes when I connect my head- phones?Speaker volume cannot be set as required? Display doesn’t work?General Specifications TX-SR702/702EAmplifier Section Video SectionSpecifications TX-SR602/602E, TX-SR8260 FTCOnkyo Europe Electronics GmbH Onkyo Europe UK Office

TX-SR8260, TX-SR602/602E, TX-SR702/702E specifications

The Onkyo TX-SR702/702E, TX-SR602/602E, and TX-SR8260 are part of Onkyo's esteemed lineup of home theater receivers, each designed to deliver an exceptional audio experience. These models are well-regarded for their robust construction, innovative features, and advanced technologies that cater to both audiophiles and casual listeners.

Starting with the TX-SR702/702E, this 7.1-channel receiver offers 100 watts per channel, providing ample power to drive a wide range of speakers. One of its standout features is its support for Dolby Digital EX and DTS-ES, which create a more immersive sound environment. Additionally, the TX-SR702/702E comes with Onkyo’s custom application for optimizing audio depending on room acoustics, ensuring the best performance regardless of space.

The TX-SR602/602E, while slightly lower in power handling at 75 watts per channel, still includes high-quality surround sound capabilities, supporting Dolby TrueHD and DTS-HD Master Audio. This model is perfect for those who desire a compact yet powerful setup. With its user-friendly interface and straightforward setup process, the TX-SR602/602E is an excellent choice for newcomers to home theater systems.

For those seeking a more feature-rich option, the TX-SR8260 provides a powerful 100 watts per channel with an extensive array of connectivity options. It features multiple HDMI inputs, allowing users to connect various devices such as Blu-ray players and gaming consoles seamlessly. The TX-SR8260 also supports 4K pass-through technology, ensuring compatibility with the latest video formats.

All three receivers incorporate Onkyo’s integration of Audyssey MultEQ technology for precise room acoustic measurement and correction, enhancing audio fidelity. This technology allows the receiver to automatically adjust its settings according to the room's dimensions and speaker positioning for a tailored sound experience.

In terms of design, each of these models boasts a robust chassis with an emphasis on high-quality components, ensuring durability and longevity. Notably, they are compatible with various streaming services, offering onboard Wi-Fi and Bluetooth connectivity for easy access to a wide array of media.

In summary, the Onkyo TX-SR702/702E, TX-SR602/602E, and TX-SR8260 receivers are superb choices for anyone looking to build an impressive home theater system. With their powerful performance, advanced technologies, and excellent build quality, they cater to a diverse range of audio enthusiasts. Whether for movie nights or music listening, these receivers promise to significantly enhance the home entertainment experience.
Top Page Image Contents