Onkyo TX-SR602/602E, TX-SR8260 Assigning Listening Modes to Input Sources, Theater-Dimensional

TX-NR702,602_En.book Page 72 Monday, July 26, 2004 11:05 AM

Advanced Setup—Continued

4-9. Theater-Dimensional

These settings apply to the Theater-Dimensional listen- ing mode.

■a. Listening Angle

With this setting, you can specify the angle of the front left and right speakers relative to the listening position. Processing for the Theater-Dimensional listening mode is based on this setting. Ideally, the front left and right speakers should be equidistant from the listening posi- tion and at an angle close to one of the two available set- tings.

Front left speaker	Front right speaker
	20/40˚

Assigning Listening Modes to Input Sources

You can assign a default listening mode to each input source that will be selected automatically when you select each input source. For example, you can set the default listening mode to be used with Dolby Digital input signals. You can select other listening modes dur- ing playback, but the mode specified here will be resumed once the AV receiver has been set to Standby.

1		Press the [RECEIVER] button fol-
	RECEIVER	lowed by the [SETUP] button.

The main menu appears onscreen.

20º: Select if the listening angle is 20 degrees.

40º: Select if the listening angle is 40 degrees (default).

■b. Center

With this setting, you can specify whether or not you’re using a center speaker. If you are, the center channel sound will be output by the center speaker when using the Theater-Dimensional listening mode. This reduces the workload of the front left and right speakers, and cre- ates a more articulate sound space. In this case, the set- tings for the distance between the listening position and each speaker, and the level of each speaker are impor- tant, but making these settings is a breeze with the Auto- matic Speaker Setup function (see page 39).

On: Select if using a center speaker.

2

ENTER

ENTER

Use the Up and Down []/[ ] buttons to select “5. Listening Mode Preset,” and then press [ENTER].

The Listening Mode Preset menu appears.

Menu

------------------------

Basic Setup

5.Listening Mode Preset

1-----------------------.Initial Setup -

1.DVD/MULTICH

2.VIDEO1 Advanced Setup

3.VIDEO2 3.Surround Setup

4.VIDEO3 4.Audio Adjust

5.VIDEO4 5.Listening Mode Preset

6.TAPE

6.Preference

7.TUNER

8.CD

9.PHONO

Off: Select if not using a center speaker (default).

■c. Front Expand

With the Front Expander function, you can broaden the width of the front stereo image. This can be useful with narrow listening angles of 20 degrees or less.

On: Front Expander function on.

Off: Front Expander function off (default).

■d. Dialog Enhance

With this function, you can improve the clarity of the center channel, which usually contains dialog.

On: Dialog Enhance function on.

Off: Dialog Enhance function off (default).

■e. Virtual Surr Level

With this setting, you can adjust the level of virtual sur- round sound from –3 dB to +3 dB (default is 0 dB). If the clarity is poor, or the effect sounds unnatural, you may be able to improve it by lowering this setting.

3

ENTER

ENTER

Use the Up and Down []/[ ] buttons to select the input selec- tor that you want to set, and then press [ENTER].

5-1.ListeningModePreset

-----DVD/MULTICH ------

a.Ana/PCM :Last Valid b.Dolby D :Last Valid

c.DTS :Last Valid

d.D.F.2ch :Last Valid e.d.f.Mono:Last Valid f.Multiplex

:Last Valid g.Multich :Last Valid

For input selectors that have no digital input jacks, only “a. Analog” will be available.

72