Polaroid Polaview 220 manual Focus the projected image with the Focus control either, 62.4

Page 21

18Using the projector

Focusing and zooming

 

Focus the projected image with the FOCUS control either

the image

 

on the control panel or remote control. Adjust the image

 

 

size by using the ZOOM control on the control panel or

 

 

remote control.

 

 

Keystone correction

 

A keystone correction of 17 degrees is built into the

 

 

projector to compensate for image distortion. You may

 

 

want to adjust the rear feet of the projector to position

 

 

the image on the screen.

 

Image size

 

The projector 20–30mm (1.5:1) motorized zoom/focus lens

 

 

provides a high-quality display that ranges from 36 to 240

 

 

inches (diagonal). The size of the projected image changes

 

 

as you move the projector closer to the screen or adjust the

 

 

zoom lens. The following table indicates the minimum and

 

 

maximum distance from the projector to the screen for

 

 

most standard size projection screens.

 

 

 

 

 

 

Projected image

Distance from projection screen

 

 

(diagonal)

Minimum

Maximum

 

 

 

 

 

 

36 in.

42 in.

62.4 in.

 

60 in.

70.8 in.

104.4 in.

 

120 in.

141.6 in.

208.8 in.

 

180 in.

211.2 in.

313.2 in.

 

240 in.

282 in.

417.6 in.

 

 

 

 

 

If you wish to compute your own measurements, use the

 

 

following formula:

 

 

 

 

MIN 20mm:

Diagonal/.85

= Distance from screen

 

 

MAX 30mm:

Diagonal/.574 = Distance from screen

Image 21
Contents Polaview Protection against such interference when operated in a Radiate radio frequency energy and, if not installedRegarding safety, public health, environment Specifications are subject to change without noticeTable of contents Appendix a Parts Appendix B Standards Storage, cleaning and care Replacing the lampIntroduction Items included with the projector What’s in the box?Computer/video compatibility Quick start Connector panelIntroduction Introduction Detailed setup Polaroid Polaview Model 220 Projector and remote controlYour Polaview Model 220 Projector Polaroid Polaview Model 220 Projector rear view Getting started Computer Inputs Outputs Stereo L R Redrive RS Connector panelComputer and VCR connections Labeled To VGA into the projector MAC/PC port see To Mac into the computer monitor port. Plug the endConnect one of the yellow RCA composite video cable Input composite jacks yellow on the projector connectorVideo source. Connect the yellow plug at the other end Panel see the illustration belowUse Sources 1 and 2 to connect Power receptacle and AC power switch Supplying power to the projectorTurning on the projector Using the projectorSize by using the Zoom control on the control panel or On the control panel or remote control. Adjust the imageWant to adjust the rear feet of the projector to position Focus the projected image with the Focus control eitherControl-panel keys Decreases or increases the volume Image, when used with the cursorAdjusts the focus of the image Adjusts the brightness and contrastUsing the remote control Brightness, contrast, tint, phase Controls the volume, balance, trebleLaser pointer Serves as a pointing device Bass of the source connected toZoom + Zooms in and out. Press + to make Focus + Adjusts the focus of the imageMenu selections Following settings Select the Setup menu to make adjustments toOr rear projection mode Resets all adjustments toImage optimization Using the cursor pad, scroll through the menu selections From the projector control panel or remote control, pressAdjust brightness and contrast. The correct combination Examine the projected image for horizontal noise bars orAdjust the color balance of the projected image Use the Tint option to make the adjustmentsChanges from the default setting are stored in memory for Control panel or remote control commands, you canStorage, cleaning and care MaintenanceReplacing the lamp assembly Half revolution. Grasp the wire handle and gently pull Unlock the lamp assembly by rotating the locking key onLamp assembly straight out of the unit Align the lamp-assembly slide rails with the slide-railTroubleshooting Troubleshooting guideSymptom Cause Solution Where to get help Your computer dealerIf at any time you need help Brasil Polaroid Offices and Service CentersNew Zealand One Year Warranty Maintenance Optional accessory Replacement productAppendix a Parts OG45Appendix a Appendix B Standards