Polaroid Polaview 220 manual Use the Tint option to make the adjustments, That source, Green

28Using the projector

True-to-life color	Examine the projected image for true-to-life color rendition.
rendition	Use the TINT option to make the adjustments:
1	From the projector control panel or remote control, press
	the IMAGE menu key.
2	Using the cursor pad, scroll through the menu selections
	and highlight TINT on the on-screen menu display.
3	Use the left (<) and right (>) arrow keys on the cursor pad to
	adjust the color balance of the projected image.
Restoring factory	If desired, you can restore the original factory settings by
settings	selecting the SETUP menu key, using cursor pad to select
	the RESET option, and depressing the right arrow key. Any
	changes from the default setting are stored in memory for
	that source.
	Note: If for any reason the projector should not respond to
	the control panel or remote control commands, you can
	reset it by performing the following steps:
1	Turn off the unit and allow it to cool for at least 3 minutes.
2	Press the SET UP key on the projector control panel and
	turn on the projector as you continue pressing the SET UP
	key. Continue to press the SET UP key until the LEDs of the
	SOURCE 1–4 keys on the control panel light up red and
	green.
3	Release the SET UP key.
4	Reconfigure the projection settings for rear projectors, ceil-
	ing mount, as required.