Polaroid Polaview 220 manual Select the Setup menu to make adjustments to, Following settings

Page 28

Using the projector 25

SETUP menu	Select the SETUP menu to make adjustments to the
	following settings:

	Option	What it does

	PROJECTION (FRONT/REAR)	Selects the projected
		display orientation for front
		or rear projection mode.

	LOCATION (TABLE/CEILING)	Inverts the projected image
		orientation for use with a
		ceiling mount.

	LANGUAGE	Converts the on-screen
		menus from English to
		French, German, Spanish.

	FACTORY SETTINGS	Resets all adjustments to
		the factory-default settings.

	VIDEO MODE	Selects either PAL or
		SECAM operation.

If you are not actively using a menu, after approximately 10 seconds, it automatically disappears from the screen, to be replaced by your projected image.

Image 28

Contents Polaview Radiate radio frequency energy and, if not installed Protection against such interference when operated in aRegarding safety, public health, environment Specifications are subject to change without noticeTable of contents Storage, cleaning and care Replacing the lamp Appendix a Parts Appendix B StandardsIntroduction What’s in the box? Items included with the projectorComputer/video compatibility Connector panel Quick startIntroduction Introduction Polaroid Polaview Model 220 Projector and remote control Detailed setupYour Polaview Model 220 Projector Polaroid Polaview Model 220 Projector rear view Getting started Connector panel Computer Inputs Outputs Stereo L R Redrive RSComputer and VCR connections To Mac into the computer monitor port. Plug the end Labeled To VGA into the projector MAC/PC port seeInput composite jacks yellow on the projector connector Connect one of the yellow RCA composite video cableVideo source. Connect the yellow plug at the other end Panel see the illustration belowUse Sources 1 and 2 to connect Supplying power to the projector Power receptacle and AC power switchUsing the projector Turning on the projectorOn the control panel or remote control. Adjust the image Size by using the Zoom control on the control panel orWant to adjust the rear feet of the projector to position Focus the projected image with the Focus control eitherControl-panel keys Image, when used with the cursor Decreases or increases the volumeAdjusts the focus of the image Adjusts the brightness and contrastUsing the remote control Controls the volume, balance, treble Brightness, contrast, tint, phaseLaser pointer Serves as a pointing device Bass of the source connected toFocus + Adjusts the focus of the image Zoom + Zooms in and out. Press + to makeMenu selections Select the Setup menu to make adjustments to Following settingsOr rear projection mode Resets all adjustments toImage optimization From the projector control panel or remote control, press Using the cursor pad, scroll through the menu selectionsAdjust brightness and contrast. The correct combination Examine the projected image for horizontal noise bars orUse the Tint option to make the adjustments Adjust the color balance of the projected imageChanges from the default setting are stored in memory for Control panel or remote control commands, you canMaintenance Storage, cleaning and careReplacing the lamp assembly Unlock the lamp assembly by rotating the locking key on Half revolution. Grasp the wire handle and gently pullLamp assembly straight out of the unit Align the lamp-assembly slide rails with the slide-railTroubleshooting guide TroubleshootingSymptom Cause Solution Your computer dealer Where to get helpIf at any time you need help Polaroid Offices and Service Centers BrasilNew Zealand One Year Warranty Maintenance Replacement product Optional accessoryAppendix a Parts OG45Appendix a Appendix B Standards