Pioneer PDSP-1 manual Selecting the Audio Mode, Using, Digital Sound Pr ojector, Dolby Digital

Page 25

	Using the Remote	Watching Television	Watching a DVD	Using a Pioneer DVD	Selecting the Audio
	Control Unit	Watching Television	Watching a DVD	Recorder	Mode
	Control Unit			Recorder	Mode

Selecting the Audio Mode

Listening to Stereo Sound in Surround Mode

Stereo broadcasts, CD playback and other 2-channel sounds can be enjoyed in surround sound mode.

1Set the touch panel to the PDSP menu.

From the HOME menu, press ; from other menus, press .

PDSP menu

2Press .

The television screen will display the audio mode.

Each time the button is pressed, the audio mode will change in the following order.

Using

PLII Movie

PLII Music

Pro Logic

Stereo

Notes:

PLII Movie: Pro Logic II Movie

This mode is designed for use with film soundtracks, and allows actors’ dialogue to be heard from the most natural direction.

PLII Music: Pro Logic II Music

This mode is designed for use with music sources. The surround effect recreates the ambience experienced in live performances.

Pro Logic:

The Pro Logic Mode is generally designed for general use with movie soundtracks. The rear channel track is heard in monaural surround.

Stereo:

The stereo mode is a two-channel mode; when this mode is selected, even multi-channel sources are played back in two channels, and heard from the front right and left.

the Digital Sound Pr ojector

If is pressed during playback of Dolby Digital and other surround sources, the following message will be displayed:

Dolby Digital

If is pressed in step 2 , the unit will change to stereo mode.

“Fine Tuning the PLII Music Mode” P35

25

Image 25

Contents PDSP-1 Installation For U.S. model PrefaceRegarding Installation Maintenance of External SurfacesContents Beam control technology FeaturesSound settings to match your room’s characteristics These operating Instructions Confirm All AccessoriesAudio Section SpecificationsFront Panel Parts and their Functions Range of the Remote Control UnitAttaching the Front Grille Rear Panel Audio output Output Optical connector About the Input/Output ConnectorsVideo outputs Monitor Output connectors SUB Woofer Output connectorsAbout the Remote Control Unit Buttons hard keys Remote Control UnitSet the touch panel to the Home menu Setting the Basic Information on the Remote Control UnitIllustration depicts U.S. model Using Digital Sound Projector Using the Remote Control UnitComponent Operation Menu Display About the Home Menu About the Pdsp digital sound projector menu Operating Menus for Other Components Watching Television Using Accompanying three menus are used to operate the DVD player Watching a DVDRecording Using a Pioneer DVD RecorderPerform recording operations on menu 1/2 at left Following four menus are used to operate the DVD recorder Playback/EditingUsing Selecting the Audio ModeDigital Sound Pr ojector Plii Movie Plii Music Pro Logic StereoEnhancing Monaural Sources MonoTest Signal Adjusting the SoundChanging Surround Sound Use the touch panel to select the Pdsp menuRight LeftSurround L Surround RAux Center Mute Bass Management Noise Source Off Surround Setup LeftLeft To edit Press Enter or Menu to exit Level 0dB Changing Each Channel’s Output LevelBass Management Sub Woofer Yes LFE Level Same as steps 1 3 on P27, Test SignalSub Woofer Menu No/LFE to panel Yes Sub Woofer / Bass ManagementAll Ch Tone Control Bass Level 0dB Adjusting the ToneTreble Level 0dB All Ch To edit Press Enter or Menu to exit 0dB Bass +Recall from Memory Calling Up a Room Sound SettingLipsync delay To edit Press Enter or Menu to exit Delay 0ms Video and Audio Timing Compensations Lipsync delayStereo Mode Menu Image width Image width value Plii Mode Adjusting Surround EffectsFine Tuning the Plii Music Mode Plii Mode Plii Off Movie Music Pro LogicPanorama Off Center width Dimension Stereo Mode Menu Image widthDisplaying the Data Screen Status Source Input 2 D Memory ModeWidth Press the Enter buttonTroubleshooting Additional Information Table of Remote Control Unit Menu Displays Dvdplayer Channel Menu Enter VOLUME,MUTE Terms displayed in menus Terms on front panel / rear panel IndexTerminology in these operating instructions Symbols and terms on remote control unit / touch panel03F00001