Pioneer PDSP-1 manual Left, Right, Surround L, Surround R, Aux Center Mute

Page 28

	Changing		Calling Up a Room	Video and Audio	Adjusting	Displaying the
		Adjusting the Tone		Timing
	Surround Sound		Sound Setting		Surround Effects	Data Screen
				Compensations

3Using the buttons, select “Surround Setup”, and press the ENTER button. The following screen appears:

Surround Setup				Front left channel
Surround Setup
1	Left	0.0dB		Front right channel
2	Right	0.0dB
3	Surround L	0.0dB		Rear left channel
3	Surround L	0.0dB		Rear left channel
4	Surround R	0.0dB		Rear right channel
5	Center	0.0dB		Rear right channel
6	Aux Center	Mute		Center channel
7	Bass Management			Center channel
7	Bass Management
8	Noise Source	off

Note:

“Aux Center” is an additional center channel. To use the “Aux Center” channel, a special dedicated setting is required; consult your installation service personnel.

4Using the buttons, select “Noise Source”, and press the ENTER button. The following screen appears:

Noise Source

1 Off

2Left

3Right

4Surround L

5Surround R

6Center

7Aux Center

8LFE

5Using the buttons, select the channel, and press the ENTER button. The test signal will be produced from the selected channel.

“Sub Woofer / Bass Management” P30

28

Image 28

Contents PDSP-1 Installation Preface For U.S. modelMaintenance of External Surfaces Regarding InstallationContents Features Beam control technologySound settings to match your room’s characteristics Confirm All Accessories These operating InstructionsSpecifications Audio SectionFront Panel Parts and their Functions Range of the Remote Control UnitAttaching the Front Grille Rear Panel About the Input/Output Connectors Audio output Output Optical connectorVideo outputs Monitor Output connectors SUB Woofer Output connectorsRemote Control Unit About the Remote Control Unit Buttons hard keysSetting the Basic Information on the Remote Control Unit Set the touch panel to the Home menuIllustration depicts U.S. model Using Digital Sound Projector Using the Remote Control UnitComponent Operation Menu Display About the Home Menu About the Pdsp digital sound projector menu Operating Menus for Other Components Using Watching TelevisionWatching a DVD Accompanying three menus are used to operate the DVD playerRecording Using a Pioneer DVD RecorderPerform recording operations on menu 1/2 at left Playback/Editing Following four menus are used to operate the DVD recorderSelecting the Audio Mode UsingDigital Sound Pr ojector Plii Movie Plii Music Pro Logic StereoMono Enhancing Monaural SourcesAdjusting the Sound Test SignalChanging Surround Sound Use the touch panel to select the Pdsp menuLeft RightSurround L Surround RSurround Setup Left Aux Center Mute Bass Management Noise Source OffLeft To edit Press Enter or Menu to exit Level 0dB Changing Each Channel’s Output LevelSame as steps 1 3 on P27, Test Signal Bass Management Sub Woofer Yes LFE LevelSub Woofer Menu No/LFE to panel Yes Sub Woofer / Bass ManagementAdjusting the Tone All Ch Tone Control Bass Level 0dBTreble Level 0dB All Ch To edit Press Enter or Menu to exit 0dB Bass +Calling Up a Room Sound Setting Recall from MemoryVideo and Audio Timing Compensations Lipsync delay Lipsync delay To edit Press Enter or Menu to exit Delay 0msAdjusting Surround Effects Stereo Mode Menu Image width Image width value Plii ModePlii Mode Plii Off Movie Music Pro Logic Fine Tuning the Plii Music ModeStereo Mode Menu Image width Panorama Off Center width DimensionStatus Source Input 2 D Memory Mode Displaying the Data ScreenWidth Press the Enter buttonTroubleshooting Additional Information Table of Remote Control Unit Menu Displays Dvdplayer Channel Menu Enter VOLUME,MUTE Index Terms displayed in menus Terms on front panel / rear panelSymbols and terms on remote control unit / touch panel Terminology in these operating instructions03F00001