Pioneer PDSP-1 manual Surround Setup Left, Aux Center Mute Bass Management Noise Source Off

Page 29

	Changing		Calling Up a Room	Video and Audio	Adjusting	Displaying the
		Adjusting the Tone		Timing
	Surround Sound		Sound Setting		Surround Effects	Data Screen
				Compensations

Changing Each Channel’s Output Level

1- 3 (Same as steps 1 - 3 on P27, “Test Signal”) The following screen appears:

Surround Setup
1	Left	0.0dB
2	Right	0.0dB
3	Surround L	0.0dB
4	Surround R	0.0dB
5	Center	0.0dB
6	Aux Center	Mute
7	Bass Management
8	Noise Source	off

Front left channel

Front right channel

Rear left channel

Rear right channel

Center channel

4Using the buttons, select the desired channel, then press the ENTER button. The following screen appears:

Left

to edit

Press ENTER or MENU to exit

Level

0.0dB

5Using the buttons, adjust the output level as desired, then press the ENTER button. Adjust the output level while listening to the test signal.

Setting range: 0.0 dB – 12.0 dB

Note:

When you’re finished, you can press the MENU button repeatedly to return to previous screens.

Adjusting the Sound

29

Image 29

Contents PDSP-1 Installation For U.S. model PrefaceRegarding Installation Maintenance of External SurfacesContents Beam control technology FeaturesSound settings to match your room’s characteristics These operating Instructions Confirm All AccessoriesAudio Section SpecificationsFront Panel Attaching the Front Grille Range of the Remote Control UnitParts and their Functions Rear Panel Audio output Output Optical connector About the Input/Output ConnectorsVideo outputs Monitor Output connectors SUB Woofer Output connectorsAbout the Remote Control Unit Buttons hard keys Remote Control UnitSet the touch panel to the Home menu Setting the Basic Information on the Remote Control UnitIllustration depicts U.S. model Component Operation Menu Display Using the Remote Control UnitUsing Digital Sound Projector About the Home Menu About the Pdsp digital sound projector menu Operating Menus for Other Components Watching Television UsingAccompanying three menus are used to operate the DVD player Watching a DVDPerform recording operations on menu 1/2 at left Using a Pioneer DVD RecorderRecording Following four menus are used to operate the DVD recorder Playback/EditingUsing Selecting the Audio ModeDigital Sound Pr ojector Plii Movie Plii Music Pro Logic StereoEnhancing Monaural Sources MonoTest Signal Adjusting the SoundChanging Surround Sound Use the touch panel to select the Pdsp menuRight LeftSurround L Surround RAux Center Mute Bass Management Noise Source Off Surround Setup LeftLeft To edit Press Enter or Menu to exit Level 0dB Changing Each Channel’s Output LevelBass Management Sub Woofer Yes LFE Level Same as steps 1 3 on P27, Test SignalSub Woofer Menu No/LFE to panel Yes Sub Woofer / Bass ManagementAll Ch Tone Control Bass Level 0dB Adjusting the ToneTreble Level 0dB All Ch To edit Press Enter or Menu to exit 0dB Bass +Recall from Memory Calling Up a Room Sound SettingLipsync delay To edit Press Enter or Menu to exit Delay 0ms Video and Audio Timing Compensations Lipsync delayStereo Mode Menu Image width Image width value Plii Mode Adjusting Surround EffectsFine Tuning the Plii Music Mode Plii Mode Plii Off Movie Music Pro LogicPanorama Off Center width Dimension Stereo Mode Menu Image widthDisplaying the Data Screen Status Source Input 2 D Memory ModeWidth Press the Enter buttonTroubleshooting Additional Information Table of Remote Control Unit Menu Displays Dvdplayer Channel Menu Enter VOLUME,MUTE Terms displayed in menus Terms on front panel / rear panel IndexTerminology in these operating instructions Symbols and terms on remote control unit / touch panel03F00001