Troubleshooting | Table of Remote Control Unit Menu | Index | |
Displays | |||
|
| ||
|
|
|
Problems
with Use or Operation?
?
Can’t recharge remote control unit
Check the recharge indicator in the upper right corner of the remote | P16 |
control unit’s touch panel to confirm whether the remote control unit is sitting on the recharger and recharging correctly.
If the remote control unit’s battery won’t hold a sufficient charge to allow use of the remote control unit even after proper recharging, the unit’s
Remote control unit doesn’t work
Check that the main power switch is turned on, the power cord is con- | P10 |
nected securely, and the front panel’s POWER ON (Blue) or STANDBY |
|
(Red) indicator is lighted. | P14 |
Check the remote control unit’s remaining charge indicator to confirm that | |
the remote control unit’s battery is properly recharged. | P11 |
You may be using the remote control too far from the sensor (Try moving |
closer to the digital sound projector).
Remote operation may become unreliable if direct sunlight, a fluorescent lamp, or other strong light source is striking the remote control sensor on the front panel.
Remote control unit doesn’t operate connected Pioneer DVD recorder
Depending on the model, some functions may not be supported.
Touch panel menus don’t change
If the remote control menu screens do not change, try using the following procedure to reset the remote control unit. Resetting the remote control unit will not erase recorded settings.
If the unit does not operate normally due to external effects (such as static electricity)
Disconnect the power plug from the outlet and insert again to return to normal operating conditions.
Resetting the Remote Control Unit
1 Use a Phillips screwdriver | 2 Remove the panel. | 3 Use a narrow pointed |
to remove the screw on |
| object to press the RESET |
the back panel of the |
| button. |
remote control unit. |
|
|
Additional Information
39