Pioneer PDSP-1 manual Calling Up a Room Sound Setting, Recall from Memory

Page 32

	Changing		Calling Up a Room	Video and Audio	Adjusting	Displaying the
		Adjusting the Tone		Timing
	Surround Sound		Sound Setting		Surround Effects	Data Screen
				Compensations

Calling Up a Room Sound Setting

Multiple sound settings can be recorded in accordance with measured room characteristics. Select the setting that produces the optimum listening environment.

1Use the touch panel to select the PDSP menu.

From the HOME menu press ; from other menus, press .

2Press the MENU button.

The “System Setup” menu display appears.

3Using the buttons, select “Recall Memory”, then press the ENTER button. The following screen appears.

Recall from..

1 Memory 1

2Memory 2

3Memory 3

4Memory 4

5Memory 5

6Memory 6

7Memory 7

8Memory 8

4Using the buttons, select the desired sound setting, then press the ENTER button.

Notes:

When you’re finished, you can press the MENU button repeatedly to return to previous screens.

A maximum of eight room sound settings can be stored in memory. Consult your installation service personnel regarding the settings that will work best with your room.

32

Image 32

Contents PDSP-1 Installation Preface For U.S. modelMaintenance of External Surfaces Regarding InstallationContents Features Beam control technologySound settings to match your room’s characteristics Confirm All Accessories These operating InstructionsSpecifications Audio SectionFront Panel Attaching the Front Grille Range of the Remote Control UnitParts and their Functions Rear Panel About the Input/Output Connectors Audio output Output Optical connectorVideo outputs Monitor Output connectors SUB Woofer Output connectorsRemote Control Unit About the Remote Control Unit Buttons hard keysSetting the Basic Information on the Remote Control Unit Set the touch panel to the Home menuIllustration depicts U.S. model Component Operation Menu Display Using the Remote Control UnitUsing Digital Sound Projector About the Home Menu About the Pdsp digital sound projector menu Operating Menus for Other Components Using Watching TelevisionWatching a DVD Accompanying three menus are used to operate the DVD playerPerform recording operations on menu 1/2 at left Using a Pioneer DVD RecorderRecording Playback/Editing Following four menus are used to operate the DVD recorderSelecting the Audio Mode UsingDigital Sound Pr ojector Plii Movie Plii Music Pro Logic StereoMono Enhancing Monaural SourcesAdjusting the Sound Test SignalChanging Surround Sound Use the touch panel to select the Pdsp menuLeft RightSurround L Surround RSurround Setup Left Aux Center Mute Bass Management Noise Source OffLeft To edit Press Enter or Menu to exit Level 0dB Changing Each Channel’s Output LevelSame as steps 1 3 on P27, Test Signal Bass Management Sub Woofer Yes LFE LevelSub Woofer Menu No/LFE to panel Yes Sub Woofer / Bass ManagementAdjusting the Tone All Ch Tone Control Bass Level 0dBTreble Level 0dB All Ch To edit Press Enter or Menu to exit 0dB Bass +Calling Up a Room Sound Setting Recall from MemoryVideo and Audio Timing Compensations Lipsync delay Lipsync delay To edit Press Enter or Menu to exit Delay 0msAdjusting Surround Effects Stereo Mode Menu Image width Image width value Plii ModePlii Mode Plii Off Movie Music Pro Logic Fine Tuning the Plii Music ModeStereo Mode Menu Image width Panorama Off Center width DimensionStatus Source Input 2 D Memory Mode Displaying the Data ScreenWidth Press the Enter buttonTroubleshooting Additional Information Table of Remote Control Unit Menu Displays Dvdplayer Channel Menu Enter VOLUME,MUTE Index Terms displayed in menus Terms on front panel / rear panelSymbols and terms on remote control unit / touch panel Terminology in these operating instructions03F00001