Optoma Technology XX152 N manual RS232 Protocol Function List, UART16550 Fifo

Appendices

RS232 Protocol Function List

Baud Rate	9600		Note: There is a <CR> after all ASCII commands, 0D is the HEX code for <CR> in ASCII code
Data Bits	8
Parity	None
Stop Bits	1
Flow Control	None
UART16550 FIFO	Disable
Projector Return (Pass): P			XX=01-99, projector's ID, XX=00 is for all projectors
Projector Return (Fail): F
~	X	X	X		X	X
Lead Code	Projector ID		Command ID				space
Function							ASCII
Power			On/Off			n=1/n=0 & 2	~XX00 n
Re-sync							~XX01 n
		HDMI 1				n=1	~XX12 n
		VGA 1				n=5
Direct Source Commands		VGA 1 Component				n=8
		Video				n=10
		Component RCA				n=14
		HDMI 2				n=15
		Cinema				n=1	~XX20 n
		Bright				n=2
		Photo				n=3
	Display Mode	Reference				n=4
		User				n=5
		ISF Day				n=7
		ISF Night				n=8
		3D				n=9
	Contrast					n= -50 - +50	~XX22 n
	Brightness					n= -50 - +50	~XX21 n
	Color					n= -50 - +50	~XX45 n
	Tint					n= -50 - +50	~XX44 n
	Sharpness					n= 0 - +15	~XX23 n
		Noise Reduction				n= 0 - 10	~XX196 n
			Film			n=1	~XX35 n
				Curve Type		n=-7 - +7	~XX182 n
				Offset		n=-5 - +5	~XX183 n
				Reset		n=1	~XX206 n
			Video			n=2	~XX35 n
				Curve Type		n=-7 - +7	~XX184 n
				Offset		n=-5 - +5	~XX185 n
		Gamma		Reset		n=1	~XX207 n
			Graphics			n=3	~XX35 n
				Curve Type		n=-7 - +7	~XX186 n
				Offset		n=-5 - +5	~XX187 n
				Reset		n=1	~XX208 n
			Standard			n=4	~XX35 n
				Curve Type		n=-7 - +7	~XX188 n
				Offset		n=-5 - +5	~XX189 n
				Reset		n=1	~XX209 n
			PureMotion	OFF		n=0	~XX190 n
				LOW		n=1	~XX190 n
				MED		n=2	~XX190 n
				HIGH		n=3	~XX190 n
			PureDetail	OFF		n=0	~XX41 n
				1		n=1	~XX41 n
				2		n=2	~XX41 n
		PureEngine		3		n=3	~XX41 n
			PureColor	OFF		n=0	~XX42 n
				1		n=1	~XX42 n
IMAGE				2		n=2	~XX42 n
				3		n=3	~XX42 n
				4		n=4	~XX42 n
				5		n=5	~XX42 n
			PureEngine Demo	OFF		n=0	~XX197 n
				H Split		n=1	~XX197 n
				V Split		n=2	~XX197 n
	Advanced	DynamicBlack	OFF			n=0	~XX191 n
			Cinema 1			n=1
			Cinema 2			n=2
				Red Gain		n= -50 - +50	~XX24 n
				Green Gain		n= -50 - +50	~XX25 n
			RGB Gain/Bias	Blue Gain		n= -50 - +50	~XX26 n
				Red Bias		n= -50 - +50	~XX27 n
				Green Bias		n= -50 - +50	~XX28 n
				Blue Bias		n= -50 - +50	~XX29 n
				Reset		n=1	~XX33 n
					D50	n=1	~XX210 n
					D65	n=2	~XX210 n
			Color Temperature		D75	n=4	~XX210 n
					D83	n=5	~XX210 n
					D93	n=6	~XX210 n
					Native	n=7	~XX210 n
					Native	n=1	~XX211 n
			Color Gamut		DLP cinema	n=2	~XX211 n
		Color Settings / RGB			HDTV	n=3	~XX211 n
					EBU	n=4	~XX211 n
		Gain/Bias
					SMPT-C	n=5	~XX211 n
				Red		n=1	~XX212 n
				Green		n=2	~XX212 n
				Blue		n=3	~XX212 n
			CMS	Cyan		n=4	~XX212 n
				Yellow		n=5	~XX212 n
				Magenta		n=6	~XX212 n
				x offset	-50 ~ 50	n= -50 - +50	~XX213 n
				y offset	-50 ~ 50	n= -50 - +50	~XX214 n
				Reset		n=1	~XX215 n
				Auto		n=1	~XX37 n
				RGB (0-255)*	*RGB (0-255) supports when	n=2
			Color Space		HDMI is detected
				RGB(16 - 235)*	*RGB(16 - 235)supports	n=4
					when HDMI is detected
				YUV		n=3
			4:3			n=1	~XX60 n
			16:9			n=2
		Format	LBX			n=5
			Native			n=6
			Auto235			n=8
			SuperWide			n=9
		Edge Mask				n=0-5	~XX61 n
		Zoom				n=0-10	~XX62 n
		V Image Shift (16:9)				n= -50 - +50	~XX64 n
DISPLAY		V Keystone				n= -30 - +30	~XX66 n
			3D Mode	DLP Link/VESA 3D		n=1/n=2	~XX230 n
			3D->2D	3D / L / R	2D->2D; 3D->3D / 3D->L	n=1/n=2/n=3	~XX400 n
		3D			/3D->R
			3D Format	Off/SBS/Top and	Decoding HDMI1.3 3D timing	n=0/n=1/n=3/n-4	~XX405 n
				Bottom/Frame Sequential
			3D Sync. Invert	On/Off		n=0/n=1	~XX231 n
			Off			n=0	~XX199 n
		SuperWide	On (16:9)			n=1
			On (2.35:1)			n=2
			Auto			n=3

English 54