Appendices
Ceiling Mount Installation
NOTE
Please note that damage resulting from incorrect installation will invalidate the warranty.
. To prevent damage to your projector, please use the Optoma ceil- ing mount.
2.If you wish to use a third party ceiling mount kit, please ensure the screws used to attached a mount to the projector met the follow- ing specifi cations:
Screw type: M6
Maximum screw length: 2mm
Minimum screw length: 0mm
Warning:
. If you buy a ceiling mount from another company, please be sure to use the correct screw size. Screw size will vary depending on the thickness of the mounting plate.
2.Be sure to keep at least 0cm gap between the ceiling and the bottom of the projector.
3.Avoid installing the projector near a heat source.
370.90mm |
|
|
|
(14.60”) |
|
|
|
75.34mm |
|
|
|
(2.97”) |
|
|
|
188.10mm | (7.40”) |
|
|
220.00mm |
|
|
|
(8.66”) |
|
|
|
20.00mm |
|
|
|
(0.79”) |
|
|
|
138.50mm | (5.45”) | 498.57mm | (19.63”) |
260.00mm |
|
|
|
(10.23”) |
|
|
|
81.19mm | (3.20”) |
| 97.99mm | (3.86”) |
| 10.99mm |
|
| (0.43”) |
|
120.00mm | 120.00mm |
|
(4.72”) | (4.72”) |
|