JVC DT-V24L3DY, DT-V20L3DY specifications Settings of E.AUDIO Group

Menu Configuration—MAIN MENU (cont.)

Adjustment bar Displayed when selecting “BALANCE.”

Operation guide

Shows the buttons for each operation.

•The menu automatically disappears in about 30 seconds after the previous operation.

•Some items may not appear on the menu depending on the input or the input signal.

•The items controlled by the MAKE system do not appear on the menu.

NOTE

Settings of “E.AUDIO GROUP”

The setting values and selectable audio channels of EMBEDDED AUDIO signals are as follows.

1G: channel(s) 1/2/3/4/1+2/3+4/1 – 4 (1G)

2G: channel(s) 5/6/7/8/5+6/7+8/5 – 8 (2G)

1-2G:channel(s) 1/2/3/4/5/6/7/8/1+2/3+4/5+6/7+8/1 – 4 (1G)/5 – 8 (2G)/1 – 8 (1G+2G)

3G: channel(s) 9/10/11/12/9+10/11+12/9 – 12 (3G)

1-3G:channel(s) 1/2/3/4/5/6/7/8/9/10/11/12/1+2/3+4/5+6/7+8/9+10/11+12/1 – 4 (1G)/5 – 8 (2G)/ 9 – 12 (3G)/1 – 8 (1G+2G)/1 – 12 (1-3G)

Example of the level meter display—Level meter position and audio channels

Ex.: When “LEVEL METER ch” is set to “LINE” and “BAR TYPE” is set to “3COLORS”

OVER LEVEL REFERENCE LEVEL

Red

Yellow

Green

•When “BAR TYPE” is set to “W.100,” the standard input level set in “REFERENCE LEVEL” is displayed with the line indication. The input level set in “OVER LEVEL” is not displayed.

•The level meter with no audio signal input is displayed in white for “3COLORS,” and in gray for “W.100.”

•You can select the position of the level meter display—top or bottom of the screen (☞ “POSITION” in “INFORMATION” on page 15).

			12
AUDIO SETTING
Settings for the audio output balance, EMBEDDED AUDIO signals and level meter
Item		To do	Setting value
BALANCE		Adjust the balance between the right and left	L5 – L1, 0, R1 – R5
		speakers.
AUDIO1 ASSIGN.		Select the video input which the audio signal	SDI-1, SDI-2, DVI, COMP/RGB, VIDEO-1,
		through AUDIO ASSIGN (IN 1) terminal is	VIDEO-2
		assigned to.
AUDIO2 ASSIGN.		Select the video input which the audio signal
		through AUDIO ASSIGN (IN 2) terminal is
		assigned to.
E.AUDIO GROUP*1		Select the audio channel group of the	☞ “NOTE”
		EMBEDDED AUDIO signals.
LEVEL METER		Adjust the level meter display for the	☞ “NOTE”
SETTING*1		EMBEDDED AUDIO signals.
	LEVEL METER ch	Select how the audio channels are displayed on	OFF, LINE (Displays the channels 1 – 6
		the level meter.	at the left of the screen and 7 – 12 at the
			right.), DIVIDE (Displays the odd channels at
			the left of the screen and the even channels
			at the right.)
	BAR TYPE	Select the color of the level meter display.	3COLORS (3 colors to indicate variations in
			input levels), W.100 (white)
	REFERENCE	Select the standard input level indicated on the	–20dB, –18dB
	LEVEL	level meter.
	OVER LEVEL	Select the input level’s lower limit indicated in	–10dB, –8dB, –6dB, –4dB, –2dB
		red for the “3COLORS” display.
	BAR BRIGHTNESS	Select the brightness of the level meter.	LOW, HIGH

*1 Memorized for each input.